RESOURCES


Icon Glossary

Best Practices for Cleaning
and How To Guide

CFIA Approved List

Cost Dilution

Dilution Equivalencies
PDF FILES OPEN DONWLOAD content
Maxim Truck N Bus AODA.pdf ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Truck N Bus Product Code: 1515 Recommended Use: Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hydroxide 1310 Tetrasodium Ethylene Diamine - 5 64 02 8 Alcohol Ethoxylate 68439 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or other proper respiratory edical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated y a physician. Wash contaminated clothing before reuse. ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation w ith corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Hydrogen gas may be produced on prolonged contact with metals such as aluminum, tin, lead and zinc. Hazardous Decomposition Products: Oxides of sodium, oxides of sulphur, oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste contain er. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any oth er chemicals. Store at temperatures below 30 C and keep from freezing. Do not store in aluminum, copper, copper alloys and galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Greenish yellow, clear liquid. Odour: Mild odor. No added fragrance. Odour threshold: N/A pH: ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Avoid contact with acid/oxidizers. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid Incompatibility: Incompatible with acid, metals and alloys, zinc, tin, aluminum, organic chemicals, nitrocarbons, halocarbons. Hazardous Decomposition Products: Oxides of sodium, oxides of sulphur, oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Necrosis, tissue destruction, corrosion. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 0.01% Trisodium Nitrilotriacetate (CAS# 5064 3) which is listed as Group 2B carcinogen by IARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM TRUCK N BUS SAFETY DA TA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Biodegradable Disinfectant AODA.pdf ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Biodegradable Disinfectant Product Code: Recommended Use: Ecologo certified concentrated peroxide based cleaner Canada Drug Identification Number (DIN) # Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITATION – Category 2A EYE DAMAGE/ IRRITATION – Category 2A SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P280 Wear eye protection and protective gloves. P261 Avoid breathing fume/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 + P362 + P364 If skin irritation or rash occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrogen Peroxide 7722 Alcohol Ethoxylate 68991 Limonene 0.1 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 mi nutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during f lushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Irri tating to eyes and skin. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, dry chemical powder, carbon dioxide. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Do not use CO extinguisher on this material. Unusual Fire / Explosion Hazards: Not flammable but can cause spontaneous combustion of flammable materials and continued support of the combustion because it liberates oxygen as it decomposes. Drying of concentrated product on clothing or other combustible material may cause fire. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing Do not store in metal or galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES pearance: Clear, colourless liquid. Odour: Citrus scent. Odour threshold: N/A pH: 5.5 6.5 ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 and below 5 C. Keep away from heat, sparks and flame. Avoid hot work and sources of ignition or on near empty containers. Incompatibility: Oxidizing agents, iron, copper, brass, bronze, chromium, zinc, lead, silver, manganese. Contact with combustible material may result in spontaneous combustion. Hazardous Decomposition Products: Carbon dioxide, carbon monoxid Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Symptoms: May cause serious irritation to eyes and skin. May cause irritation to respiratory track limonene is a known skin sensitizer. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: This product contains roughly 0. % of D Limonene (CAS# 5989 5) which is a known skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Limonene (CAS# 5989 5): (Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static Toxicity to Fish Species: Limonene (CAS# 5989 5): (Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A (Lepomis macrochirus) 56 mg/L, Exposure Time, 96 h, Test Type: Static (Oncorhynchus mykiss) 10.0 32.0 mg/L, Exposure Time, 96 h, Test Type: Static Alcohol Ethoxylate (CAS# 68991 0): (Fish) 70.1 mg/L, Exposure Time, 48h, Test Type: Static Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): 32 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68991 0): (Daphnia magna (water flea)): ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION 5.3 mg/L, Exposure Time: 48h, Test Type: N/A Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo program under UL27 Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: PESTICIDE DISPOSAL Pesticide wastes are acutely azardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. CONTAINER DISPOSAL Non refillable container. Do not reuse or refill this container. Offer for recycling, if available or puncture and dispose of in a sanitary landfill (For containers 5 gallons or less): Triple rinse container promptly after emptying. Triple rinse as follows: Empty the remaining contents into ap plication equipment or a mix tank and drain for 10 seconds after flow begins to drip. Fill container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drai n for 10 seconds after the flow begins to drip. Repeat this procedure two more times. (For containers greater than 5 gallons): Triple rinse container promptly after emptying. Triple rinse as follows: Empty remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end d tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Environmental Hazards: Not available. Special Precautions for User Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration ��PROJECT CLEAN BIODEGRADABLE DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Lift Plus AODA.pdf ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Lift Plus Product Code: 120064 Recommended Use: Hydrogen peroxide based bleach Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards OXIDIZING LIQUID – Category 2 Health Hazards: ACUTE TOXICITY – ORAL – Category 4 SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 Symbol: Signal word: Danger Hazard Statement: H272 May intensify fire; oxidizer. H303 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H31 8 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220 Keep away from clothing and other combustible materials. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection Responses: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information on this label). P305 + P35 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P363 Wash contaminated clothing before reuse. P370 + P378 In case of fire: Use water fog, alcohol foam to extinguish. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrogen Peroxide 7722 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry o r articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES a chemical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Conta ct Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye o r eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor, or you arrive in an emergency room. The person should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respirator y tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Substance is non combustible but has an oxidizing effect. ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unusual Fire / Explosion Hazards: Substance is an oxidizer, may intensify fire. The decomposition rate, which is low at room temperature, is accelerated by heat, light and alkalies. It can increase to an explosion. Decompose to water and oxygen. Hazardous Decomposition Products: None known. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away fr om sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust) or good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Pers onal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical gog gles or safety glasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Colo rless, clear liquid Odour: Odo rless Odour threshold: N/A pH: 4.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOC N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Decomposition rate is slow in room temperature. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Combustible materials exposed to hydrogen peroxide should be immediately submerged in or ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY rinsed with large amounts of water to ensure that all hydrogen peroxide is removed. Residual hydrogen peroxide that is allowed to dry (upon evaporation, hydrogen perox ide can concentrate) on organic materials such as paper, fabrics, cotton, leather, wood, or other combustibles, can cause the material to ignite and result in a fire. Incompatibility: Organic materials. Reducing agents. Alkalis. Combustible material. Metals. Heavy metals and their salts. Hazardous Decomposition Products: Oxygen, steam. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Redness. Burning. Skin might turn white. Prolonged contact ay cause blindness. Coughing and/ or wheezing. Acute Toxicity Estimates: ATE �1518 mg/kg, 0% of the mixture consists of ingredients(s) of unknown acute toxicity Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Hydrogen Peroxide (CAS# 7722 1) is listed as Group 3 carcinogen by IARC. Group 3 Not Classifiable as to Carcinogenicity in Humans Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A Lepomis macrochirus mg/L, Exposure Time, 96 h, Test Type: Static Oncorhynchus mykiss 10.0 32.0 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. ack to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 2014 UN Proper Shipping Name: HYDROGEN PEROXIDE, AQUEOUS SOLUTION w/20 60% Hydrogen Peroxide (stabilized as necessary) Transport Hazard Class(es): 5.1(8) Packing Group: Environmental Hazards: Readily biodegradable. Special Precautions for User: Missing Additional Information: Limited Quantity Index: 1kg Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM MAX LIFT PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product.
Maxim Hand & Body (Floral) AODA.pdf ��MAXIM HAND & BODY ( FLORAL ) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Hand & Body ( Floral Product Code: 1300575 Recommended Use: Floral scented hand soap Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITAITON – Category 2 EYE DAMAGE/ IRRITATION – Category 1 CARCINOGENICITY – Category 2 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 8 Causes serious eye damage . H351 Suspected of causing cancer . H317 May cause an allergic skin reaction. Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium (C14 16) Olefin Sulfonate 68439 Sulfuric Acid, Mono C10 Alkyl Esters, Sodium Salts 68585 Coconut Diethanolamide 68603 Diethanolamine 111 Cocamidopropyl betaine 61789 Perfume 0.1 Mixture SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of cont amination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazard ous Decomposition Products: Carbon oxides, nitrogen oxides, carbamates. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Pro vincial or Federal regulations. ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Eye wash, safety shower and fu ll protective clothing recommended in the immediate work area. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Opaque pink liquid. Odour: Floral scent. Odour threshold: N/A pH: 6.0 8.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 2000 3000 cP @ 20 VOCs: N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizers, strong acids. flammable liquid, explosive, pyrophoric substances, ammonium nitrate, organic peroxides. Hazardous Decomposition Products: Carbon oxides, nitrogen oxides, carbamates. SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage. Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection HMIS Protection Group Not required ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations ��MAXIM HAND & BODY ( FLORAL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Satin Finish AODA.pdf ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Satin Finish Product Code: 300 945 Recommended Use: Matte a crylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated cl othing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain med ical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Impo rtant Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on c omponents indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��MAXIM SATIN FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Laundry Softener AODA.pdf ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Laundry Softener Product Code: Recommended Use: Laundry softener Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITATION Category 2A EYE DAMAGE/ IRRITATION Category 2A Symbol: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P280 Wear eye protection and protective gloves. P261 Avoid breathing fume/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P321 Specific treatment (see supplemental first aid information on this label). ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P33 + P317 + P362 + P364 If skin irritation occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Tallow Amido Imidazolinum Methosulphate 68122 Isopropanol Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration wit h the aid of a pocket mask equipped with a one way valve or other proper respiratory medical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Ca a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushi ng. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect thems elves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin: Irritating to eyes. Repeated or prolonged skin contact ma y cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Isopropanol is flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None. Hazardous Decomposition Products: Unidentified organic substances. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. O therwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at tempe ratures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Synthetic apron. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Splash goggles. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Opaque, green liquid. Odour: Fresh scent. Odour threshold: N/A pH: 4.0 5.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Isopropanol is flammable. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 50cP @ 20 VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: N/A Conditions to avoid: Temperatures above 30 C and below 5 Incompatibility: Strong oxidizing agents and strong acids. Hazardous Decomposition Products: Unidentified organic substances. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye and skin irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety glasses + Gloves HMIS Protection Group B ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets ��PROJECT CLEAN LAUNDRY SOFTENER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulat ory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT SE Specific Target Org an Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Sheergloss AODA.pdf ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Sheergloss Product Code: 300 945 Recommended Use: crylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated cl othing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain med ical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Impo rtant Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on c omponents indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��MAXIM HEERGL SS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Hyper Concentrate Oxygen Bleach AODA.pdf ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Hyper Concentrate Oxygen Bleach Product Code: Recommended Use: Hydrogen peroxide based bleach Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards OXIDIZING LIQUID – Category 2 Health Hazards: ACUTE TOXICITY – ORAL – Category 4 SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 Symbol: Signal word: Danger Hazard Statement: H272 May intensify fire; oxidizer. H303 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H31 8 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220 Keep away from clothing and other combustible materials. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection Responses: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information on this label). P305 + P35 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P363 Wash contaminated clothing before reuse. P370 + P378 In case of fire: Use water fog, alcohol foam to extinguish. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrogen Peroxide 7722 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry o r articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES a chemical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Conta ct Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye o r eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor, or you arrive in an emergency room. The person should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and s kin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Substance is non combustible but has an oxidizing effect. ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unusual Fire / Explosion Hazards: Substance is an oxidizer, may intensify fire. The decomposition rate, which is low at room temperature, is accelerated by heat, light and alkalies. It can increase to an explosion. Decompose to water and oxygen. Hazardous Decomposition Products: None know n. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal r egulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSO NAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust) or good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropri ate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSO NAL PROTECTION Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Colo rless, clear liquid Odour: Odo rless Odour threshold: N/A pH: 4.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOC N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Decomposition rate is slow in room temperature. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Combustible materials exposed to hydrogen peroxide should be immediately submerged in or ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY rinsed with large amounts of water to ensure that all hydrogen peroxide is removed. Residual hydrogen peroxide that is allowed to dry (upon evaporation, hydrogen peroxide can concentrate) on organic materials such as paper, fabrics, cotton, leather, wood, or other combusti bles, can cause the material to ignite and result in a fire. Incompatibility: Organic materials. Reducing agents. Alkalis. Combustible material. Metals. Heavy metals and their salts. Hazardous Decomposition Products: Oxygen, steam. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Redness. Burning. Skin might turn white. Prolonged contact ay cause blindness. Coughing and/ or wheezing. Acute Toxicity Estimates: ATE �1518 mg/kg, 0% of the mixture consists of ingredients(s) of unknown acute toxicity Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Hydrogen Peroxide (CAS# 7722 1) is listed as Group 3 carcinogen by IARC. Group 3 Not Classifiable as to Carcinogenicity in Humans Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A Lepomis macrochirus mg/L, Exposure Time, 96 h, Test Type: Static Oncorhynchus mykiss 10.0 32.0 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. ack to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 2014 UN Proper Shipping Name: HYDROGEN PEROXIDE, AQUEOUS SOLUTION w/20 60% Hydrogen Peroxide (stabilized as necessary) Transport Hazard Class(es): 5.1(8) Packing Group: Environmental Hazards: Readily biodegradable. Special Precautions for User: Missing Additional Information: Limited Quantity Index: 1kg Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, a nd the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC Internationa l Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��PROJECT CLEAN HYPER CONCENTRATE OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Non-Toxic Floor Finish AODA.pdf ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Non Toxic Floor Finish Product Code: Recommended Use: Ecologo certified zinc free floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Acrylic Emulsion Mixture Back to Top ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated cl othing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain med ical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Impo rtant Symptoms/ Effects, Acute and Delayed: Ingestion: Aspiration into lungs may cause vomiting and lung injury. Inhalation: Aspiration into lungs can cause lung injury. Inhaling may cause dizziness and drowsiness. Eyes and skin Corrosive to eyes. Skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Material can splatter above 100 C/212 F. Dried product can burn. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, phosphoric oxides, phosphoric acids, hydrocarbons, ketones, aldehydes, acrylic monomers. Back to Top ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Ba ck to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Milky white liquid Odour: No added fragrance, slight ammonia odour. Odour threshold: N/A pH: 8.0 9.0 ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: None known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, phosphoric oxides, phosphoric acids, hydrocarbons, ketones, aldehydes, acrylic monomers. Back to Top SECTION 1 1: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 1: TOXICOLOGICAL INFORMATION Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration haza rd. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: The polymers are not biodegradable, but they would be removed in biological wastewater treatment plants by adsorption to biosolids. No bioconcentration of the polymeric component is expected. Back to Top SECTION 1 DISPOSAL CONSI DERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection A = Safety glasses HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��PROJECT CLEAN NON TOXIC FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: egulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo RTU Disinfectant AODA.pdf ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean RTU Disinfectant Product Code: 00600 Recommended Use: Ready Use (RTU) disinfectant cleaner. Canada Drug Identification Number (DIN) 02500221 Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/IRRITATION Category 2 Environmental Hazards: HAZARDOUS TO THE AQUATIC ENVIRONMENT, ACUTE HAZARD Category 2 HAZARDOUS TO THE AQUATIC ENVIRONMENT, LONG TERM HAZARD Category 3 Symbol: NONE Signal word: WARNING Hazard Statement: Causes eye irritation. H401 Toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands or affected area thoroughly after handling. P273 Avoid release to the environment. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P31 If eye irritation persists Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) For Canada: This product is exempt from federal WHMIS requirements for supplier labels and SDSs (Food and Drugs Act) . However, provincial WHMIS legislation still applies. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl Ammonium Chloride 0.105 85409 Alkyl Dimethyl Benzyl Ammonium Chloride (C12 18) 0.105 68391 Back to Top SECTION 4: FIRST AID MEASURES Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Inhalation: Move to fresh air. Call a physician if symptoms develop or persists. Skin Contact: Wash off with soap and water. Get medical attention if irritation develops and persists. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion: Most important symptoms/effects, acute and delayed Exposed individuals may experience eye tearing, redness, and discomfort. Indication of immediate medical attention and special treatment needed If the product is ingested, probable muco sal damage may contraindicate the use of gastric lavage. Treat the affected person appropriately. General Information: Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulatio ns. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Gloves: Butyl rubber, neoprene, latex or nitrile gloves Masks/Goggles: Safety glasses if eye contact may occur. Respirator: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Apron: Not required under normal use condition. Boots: Not required under normal use condition. ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear green liquid. Odour: Baby powder fragrance. Odour threshold: N/A pH: 11.7 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 15 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: Strong acids, alkalis and oxidizing agents. Hazardous Decomposition Produ cts: Carbon dioxide, carbon monoxide, nitrogen oxides. ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Serious eye irritation. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 0.0427% Trisodium Nitrilotriacetate (CAS# 5064 which is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Back to Top ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety glasses + Gloves HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��PROEJCT CLEAN RTU DISINFECTANT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safet y Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Pro Detergent AODA.pdf ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Product Code: 1100322 Recommended Use: Laundry Alkalinity Additive Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Label Elements: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging . P260 Do not breathe dusts or mists . P264 Wash hands and affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 + P317 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Tetrasodium (1 Hydroxyethylidene)Bisphosphonate 3794 Sodium Hydroxide 1310 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medi cal attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the Fi rst Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: ause serious chemical i njuries to upper gastrointestinal tract. Inhalation: y injure the pulmonary epitheliu m at various level s of the respiratory tract. Eyes and skin Corrosive to eyes and skin. Burn and destroy body tissues on contact. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Use extinguishing media suitable for surrounding fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Oxides of carbon, nitrogen, sodium. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE mix with any other chemicals. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear red liquid Odour: Odo rless Odour threshold: N/A pH: 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: 100 C approximate. Flash Point: �100 Evaporation Rate (Water=1): Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Relative density/Specific gravity (Water = 1): 0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOC Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Incompatibility: Acids, soft metals. Hazardous Decomposition Products: Oxides of carbon, nitrogen, sodium. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin contact, skin absorption, eye contact, inhalation, ingestion. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Aspira tion Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: CAUSTIC ALKALI LIQUID, N.O.S. (Sodium Hydroxide) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: Litre Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Personal protection B = Safety lasses + Gloves HMIS Protection Group B All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified ��MAXIM MAX PRO DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Part ition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Attack AODA.pdf ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Attack Product Code: 1300085 Recommended Use: Cleaner disinfectant. (1:256) Canada D rug dentif ication umber (DIN) 02247846 Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: ACUTE TOXICITY – ORAL – Category 4 ACUTE TOXICYT – INHALATION – Category 2 SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: DANGER Hazard Statement: H302 Harmful if swallowed. 330 Fatal if inhaled. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P260 Do not breath fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P284 In case of inadequate ventilation, wear respiratory protection. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P304 + P340 + P316 + P320 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. Specific treatment is urgent (see supplemental first aid information on this label). P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alkyl Dimethyl Benzyl Ammonium Chlorides (C12 16) 68424 Octyl decyl dimethyl ammonium chloride 32426 Didecyl dimethyl ammonium chloride 7173 Dioctyldimethylammonium chloride 5538 Ethanol Alcohol Ethoxylate 68439 Tetrasodium Salt of Back to Top ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or other proper respiratory edical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat f lushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning pain and severe digestive track damage. Inhalation: May be fatal if inhaled , shortness of breath. Eyes and skin: Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may include stinging, tearin g, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Flammable liquid and vapor. Flash Point: � 93.9 Special Firefighting Procedures: Wear full protective equipment, including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situations. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Vapors may form explosive mixture with air. ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Hazardous Decomposition Products: Irritating and toxic gases or fumes may be released during a fire. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Avoid release to the environment. Contact local authorities in case of spillage to drain/aquatic environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid discharge into drains, water courses or onto the ground. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Dike and contain large spills. Pump spills into an approved waste container. For small spills, soak up with a suitable absorbent such as clay , soil or commercially available absorbents, and then dispose of into an approved waste container. Keep away from sewers and out of natural waters. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any oth er chemicals. Store at temperatures below 30 C and keep from freezing. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear red liquid Odour: None added Odour threshold: N/A pH: 6.5 7.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 93.3 Evaporation Rate (Water=1): N/A Flammability: Not flammable. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.01 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: N/A Decomposition temperature: N/A Viscosity N/A VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: N/A Conditions to avoid: Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the flash point. Contact with incompatible materials. Incompatibility: Strong oxidizing agents. Anionic surfactants. Heat. Flame. Hazardous Decomposition Products: Oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons. Back to Top ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin, eyes, inhalation, ingestion. Symptoms: Product exposure may irritate or cause burning sensation to skin and eyes. Inhaling vapors or mists may irritate mucous membranes. Prolonged inhalation exposure may cause headaches, nausea, etc. Ingestion may cause gastro intestinal and abdominal discomfor Acute Toxicity Estimates: Oral ATE 300 but 2000 mg/kg bodyweight. Dermal ATE� 2000 mg/kg Inhalation ATE (vapour):� 0.5 but ≤ 2.0 mg/l Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 1% Trisodium Nitrilotriacetate (CAS# 5064 3) which is listed as Group 2B carcinogen by IARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: PESTICIDE DISPOSAL Pesticide wastes are acutely azardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. CONTAINER DISPOSAL Non refillable container. Do not reuse or refill this container. Offer forrecycling, if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by province and local authorities, by burning. If burned, stay out of smoke. (For containers 5 gallons or less): Triple rinse container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after flow ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS begins to drip. Fill container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. (For containers greater than 5 gallons): Triple rinse container promptly after emptying. Triple rinse as follows: Empty remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and oll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: UN 1760 UN Proper Shipping Name: CORROSIVE LIQUID, N.O.S. (quaternary ammonium chloride) Transport Hazard Class(es): Packing Group: Environmental Hazards: This product is a marine pollutant. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 1L Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses and Gloves ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM ATTACK SAFETY DATA SH EET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Spray Foam Xtra AODA.pdf ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Spray Foam Xtra Product Code: 1401400 Recommended Use: Car wash powder for hard water use Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 SPECIFIC TARGET ORGAN TOXICITY – SINGLE EXPOSURE – Ca tegory 3 CARCINOGENICITY – Category 2 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H351 Suspected of causing cancer. PRECAUTIONARY STATEMENTS Prevention P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection . ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P270 Use only outdoors or in a well ventilated area. P20 tain, read and follow all safety instructions before use. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 + P363 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information on this label). P305 + P35 + P338 IF IN EYES: Immediately r inse cautiously with water for several minutes. Re move contact lenses, if present and easy to do. Continue rinsing IF exposed or concerne d, ge t medical advice. Storage: P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Carbonate 497 Trisodium nitrilotriacetate 18662 Sodium Metasilicate 834 Sodium Hydroxide 1310 * Trisodium nitrilotriacetate’s monohydrate CAS number is 18662 8; In most world areas it is regulated as CAS 5064 3, the anhydrous form. Back to Top ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth Skin Contact Take off immediately a ll contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately Ingestion Do not induce vomiting. If the victim is ful ly conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cau se gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable Flash Point: Not flammable Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. This material is ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES harmful to aquatic l ife. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain. Unusual Fire / Explosion Hazards: Hydrogen gas may be released upon contact with certain metals. Hazardous Decompositio n Products: Oxides of carbon, oxides of sodium and other unidentifiable substances. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Eye and Face Protection: Use chemica l goggles or safety glasses. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pink powder. Odour: No added fragrance Odour threshold: N/A pH: 11.5 5 (3.1% solution) Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 0.99 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents and acids. Hazardous Decomposition Products: Oxides of carbon, oxides of sodium and other unidentifiable substances. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Nitrilotriacetic Acid (NTA) and its salts (CAS# 130 9) (evaluated as a group) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Trisodium Nitrilotriacetate (CAS# 5064 3): (Desmodesmus subspicatus) 298 mg/L, Exposure Time, 72 h, Test Type: N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Trisodium Nitrilotriacetate (CAS# 5064 3): (Lepomis macrochirus) 298 mg/L, Exposure Time, 96 h, Test Type: N/A (Pimephales promelas) 103 mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Trisodium Nitrilotriacetate (CAS# 5064 3): (Gammarus pseudolimnaeus) 80 mg/L, Exposure Time, 96 h, Test Type: N/A 400 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 16: OTH ER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM SPRAY FOAM X TRA SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Booster Plus AODA.pdf ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Booster Plus Product Code: 1200590 Recommended Use: Liquid laundry booster Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 ACUTE TOXICITY ORAL Category 4 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H302 Harmful if swallowed. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P270 Do not eat, drink or smoke when using this product. ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P280 Wear protective gloves/ protective clothing/ eye protection/ face protection Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P363 Wash contaminated clothing before reuse. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Storage: P406 Store in a corro sion resistant container with a resistant inner liner. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hydroxide 1310 Potassium Hydroxide 1310 Sodium Silicate 1349 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemical reaction that worsens t he burn. Don't put antibiotic ointment on the burn. Eye Contact: Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the si de. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor, or you arrive in an emergency room. The person should keep the eye open as wid e as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. Whil e waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to prot ect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: May cause respiratory irritation. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: eacts violently with many organic chemicals, especially nitro carbons and chlorocarbons. May react with zinc, ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES aluminum, tin and other active metals liberating flammable hydrogen gas. Dilution in water evolves large amount s of heat. Hazardous Decomposition Products: Oxides of sodium and other unidentifiable organic compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reus e if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable gloves (rubber, nitrile) recommended. Rubber/PVC aprons when skin contact may occur. Rubber boots. Eye and Face Protection: Use chemical gogg les or safety glasses. Respirator y Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, red liquid Odour: Mild odo r. No added fragrance. Odour threshold: N/A pH: �13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.23 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Avoid contact with acid/oxidizers. Incompatible with acid, metals and alloys, zinc, tin, aluminum, organic chemicals, nitrocarbons, halocarbons. Hazardous Decomposition Products: Oxides of sodium and other unidentifiable organic compounds Back to Top ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Necrosis, tissue destruction, corrosion. Acute Toxicity Estimates: Oral ATE 460 mg/kg, 2.005% of the mixture consists of ingredients of unknown acute toxicity Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1824 UN Proper Shipping Name: SODIUM HYDROXIDE SOLUTION Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety Glasses + Gloves Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM MAX BOOSTER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Sa fety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Good Riddance AT USE DILUTION AODA.pdf ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Good Riddance Product Code: 1300555 Recommended Use: Ecologo certified b iological cleaner and deodorizer at 1:4 dilution Restrictions on Use: For Food plant, Industrial and Institutional use only Manufacturer: Project Clean Inc. 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 800 663 9925 Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SENSITIZ ATION SKIN Category 1 Symbol: Signal word: WARNING Hazard Statement: H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P261 Avoid breathing mist/ spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplement first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Viable Bacteria Cultures 0.2 Not Applicable SECTION 4: FIRST AID MEASURES Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolo nged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: None known. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C (86 F) and keep from freezing SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Gloves: Not required under normal use condition. Butyl rubber, neoprene, latex or nitrile gloves if user is allergic to th is product. Masks/Goggles: Not required under normal use condition Respirator: Not required under normal use condition. Apron Not required under normal use condition. Boots: Not required under normal use condition. Other Protective Equipment: Eye wash station. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pale tan colour liquid Odour: Fresh scent Odour threshold: N/A pH: Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Solubility(ies): Dispersible in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: Strong acids or alkali compounds and strong oxidizing agents may inactive biological cultures. Hazardous Decomposition Products: None known. SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Skin Sensitization: % of the component are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo M program under UL2798. SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Not required HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). ��MAXIM GOOD RIDDANCE (1:4) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Foaming Washroom Cleaner.pdf ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Foaming Washroom Cleaner Product Code: Recommended Use: Foaming phosphoric acid cleaner/ descaler Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Phosphoric Acid 7664 Alcohol Ethoxylate 68439 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flu sh the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemical reaction that worsens the burn. Don't put a ntibiotic ointment on the burn. ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an emergency room. The person should keep the eye open as wide as possible. Wash t he person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themse lves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Small amounts swallowed incidental to normal handling operations are not likely to cause injury. May burn mouth and throat. May cause gastrointestina irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTIO N 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Contact with reactive metals may produce flammable hydrogen gas. Hazardous Decomposition Products: Oxides of phosphorus. ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regu lations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C and keep from freezing. Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: hemical goggles or safety glasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, reddish orange liquid Odour: Root beer fragrance. Odour threshold: N/A ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES pH: 1.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.1 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: None known. Conditions to avoid: Temperatures above 30 and below 5 Avoid Incompatibility: Corrosive to metals, producing flammable hydrogen gas. Not compatible with fluorine, strong oxidizing/reducing agents, bases, metals, sulfur trioxide, phosphorus pentoxide Hazardous Decomposition Products: Oxides of phosphorus, and other unidentifiable organic compounds. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1805 UN Proper Shipping Name: PHOSPHORIC ACID, LIQUID Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 5 Litres Back to Top ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection Safety Glasses Gloves Apron HMIS Protection Group C + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��PROJECT CLEAN FOAMING WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Shine AODA.pdf ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Shine Product Code: 3006 Recommended Use: Acrylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated cl othing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain med ical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Impo rtant Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components i ndicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��MAXIM MAX SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Tough Tiger AODA-Laptop10-PC.pdf ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Tough Tiger Product Code: 130 1160 Recommended Use: Heavy duty cleaner and degreaser Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 ASPIRATION HAZARD Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H304 May be fatal if swallowed and enters airways. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P301 + P330 + P331 + P316 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number 111 Alcohol Ethoxylate 68439 Sodium Hydroxide 1310 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physic ian or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Small amounts swallowed incidental to normal handling operations are not likely to cause injury. May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. Note to Physician Treatment based on sound judgment of physician and individual reactions of patient. Due to structural analogy and clinical data, this material may have a mechanism of intoxication similar to ethylene glycol. On that basis, treatment similar to ethylene glycol intoxication may be of benefit. In cases where several ounces {60 100 ml) have been ingested, consider the use of ethanol and hemodialysis in the treatment. Consult standard literature for details of treatment. If ethanol is used, a therapeuticall y effective blood concentration in the range of 100 150 mg/di may be achieved by a rapid loading dose followed by a continuous intravenous infusion. Consult standard literature for details of treatment. 4 ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, dry chemical. Unsuitable Extinguishing Media: Direct water stream. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Flammable hydrogen may be generated from contact with metals such as aluminum. Avoid contact with nitrites, strong acids, halogenated hydrocarbons. Hazardous Decompos ition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recover ed material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30oC (86oF) and keep from freezing. Do not store in aluminum, copper, copper alloys and galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical or g ood general ventilation. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or chemical goggles. Face shield if spla shing hazard exists. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, pink liquid. Odour: Ether . No added fragrance. Odour threshold: N/A pH: 12.0 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Avoid contact with acid/oxidizers. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Metals such as aluminum, brass, copper. Nitrites, strong acids, halogenated hydrocarbons Hazardous Decomposition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: 8% of the components are classified as aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Alcohol Ethoxylate (CAS# 68439 3): (algae) 100 mg/L, Exposure Time: 72 h, Test Type: N/ Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): (fish) 10 mg/L, Exposure Time, 96 h, Test Type: N/A ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Butoxyethanol (CAS# 111 (Lepomis macrochirus) 1490 mg/L, Exposure Time: 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Butoxyethanol (CAS# 111 2): (Daphnia magna (water flea)): �1000 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM TOUGH TIGER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Lemon Dish AODA.pdf ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim emon Dish Product Code: 1100 700 Recommended Use: Manual dish detergent Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITAITON Category EYE DAMAGE/ IRRITATION Category CARCINOGENICITY Category 2 SENSITIZATION SKIN Category 1 Symbol: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 Causes serious eye damage H351 Suspected of causing cancer H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P270 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P405 Store locked up. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Coconut Diethanolamide 68603 Dodecyl Benzenesulfonic Acid, Sodium Salt 25155 Dodecyl Benzenesulfonic Acid, DEA Salt 26545 Diethanolamine 111 Sodium Laureth Sulfate 9004 Perfume 0.1 Mixture SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Rinse skin. If irritation persists, obtain medical attention. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immedia tely. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in ski n irritation and dermatitis. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon oxides, metal oxide fume, sulphuric oxides. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C (86 F) and keep from freezing Do not store in metal or galvanized containers. SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Non permeable gloves (rubber, nitrile) recommended. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear , yellow liquid. Odour: Citrus scent. Odour threshold: N/A pH: 5.5 6.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Viscous. VOCs: N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Incompatibility: Strong oxidizers, flammable liquid, explosive, pyrophoric substances, ammonium nitrate, organic perox ides. Hazardous Decomposition Products: Carbon oxides, metal oxide fume, sulphuric oxides. SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage . Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: 1% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is li sted as Group 2B carcinogen by IARC. Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: % of the ingredients are classified as an aspiration hazard. SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: Coconut Diethanolamide (CAS# 68603 9): (Daphnia magna) 3.3 mg/L, Exposure Time, N/A, Test Type: Static Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available Special Precautions for User: Not availab Additional Information: Not availab le. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit ��MAXIM MON DISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION PMMCC Pensky Martens Closed Cup Partition C oefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will a ccept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Citrus Clean AODA.pdf ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Citrus Clean Product Code: 1300364 Recommended Use: Orange oil alkaline degreaser Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITATION Category EYE DAMAGE/ IRRITATION Category 1 SENSITIZATION SKIN Category 1 ASPIRATION HAZARD Category 1 Symbol: Signal word: DANGER Hazard Statement: H31 Causes skin irritation. H318 Causes serious eye damage. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H304 May be fatal if swallowed and enters airways. Prevention: P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P272 Contaminated work clothing should not be allowed out of the workplace. P271 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P321 Specific treatment (see supplemental first aid information on this label). P33 + P317 If skin irritation or rash occurs: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. immediately. Do NOT induce vomiting. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Dodecylbenzenesulfonate 25155 limonene 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with soap and water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Contaminated work clothing must not be allowed out of the workplace. D limonene is a known skin sensitizer. ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if pr esent and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Have an ophthalmologist make an evaluation of eye injury. Ingestion: Do not induce vomiting. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. If vomiting occurs spontaneously, keep head below hips to prevent aspiration of liquid into the lungs. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. En sure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Aspiration into lungs may cause vomiting and lung injury. Burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Aspiration into lungs can cause lung injury. Inhaling may cause dizziness and drowsiness. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin irritation. May If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water spray. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Avoid contact with Aldehydes, halogens, strong acids, strong oxidizing agents, alkalis, amines, ethylene oxide, halogenated hydrocarbons, isocyanates, do not use with aluminum equipment at temperatures above 50 C (120 Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SE CTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for dust generated in confined areas. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles, safety glasses or face shield if eye contact may occur. Respirator y Protection: Use NIOSH/MSHA approved dust respirator if product dust is generated. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, pale yellow liquid Odour: Citrus scent. Odour threshold: N/A pH: 11.0 12.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flash Point: � 100 C (Pensky Martin Closed Cup) Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.01 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions Avoid contact with Aldehydes, halogens, strong acids, strong oxidizing agents, alkalis, amines, ethylene oxide, halogenated hydrocarbons, isocyanates. Conditions to avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Prolonged storage may cause product to cake and become damp from atmospheric moisture. Incompatibility: Strong oxidizers, flammable liquid, explosive, pyrophoric substances, ammonium nitrate, organic pe roxides. Hazardous Decomposition Products: Oxides of carbon Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Irritating to skin and eyes. limonene is a known skin sensitizer. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Inhalation ATE: N/A Skin Sensitization: 1.5 % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: 1.5 % of the ingredients are classified as an aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Limonene (CAS# 5989 5): Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static Toxicity to Fish Species: Limonene (CAS# 5989 5): (Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM CITRUS CLEAN SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical Internation al Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Washroom Sense AT USE DILUTION AODA.pdf ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Washroom Sense Product Code: 1301300 Recommended Use: Ecologo certified safe acid wash room cleaner at 1: 8 dilution Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer: Project Clean Inc. 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 800 663 9925 Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: NONE Symbol: NO PICTOGRAM Signal word: NONE Hazard Statement: NON HAZARDOUS PRECAUTIONARY STATEMENTS Prevention: NOT REGULATED Responses: NOT REGULATED Storage: NOT REGULATED Disposal: NOT REGULATED SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Urea Methanesulfonate 207308 SECTION 4: FIRST AID MEASURES Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritatio n persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is idly losing consciousness, or is convulsing. Call a Physician. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: At temperatures above 110 C/ 230 F results in an exothermic decomposition with release of CO gas. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below C (86 F) and keep from freezing SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Gloves: Not required for normal use of product. Masks/Goggles: Not required for normal use of product. Respirator: Not required for normal use of product. Apron: Not required for normal use of product. Boots: Appropriate footwear should be selected based on the task being performed and the risks involved. Other Protective Equipment: Eye wash station. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, orange liquid Odour: Floral fragrance Odour threshold: N/A pH: Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: Do not use with chlorates, nitrates, hypochlorites , oxidizing or alkaline materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation and mild eye irritation for prolonged contact. Acute Toxicity Estimates: Oral �2000 mg/kg 0% of the mixture consist of ingredients of unknown acute oral toxicity. Dermal � 2000 mg/kg 0.329 % of the mixture consist of ingredients of unknown acute oral toxicity. Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo program under UL2759. ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection HMIS Protection Group Not req uired All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workp lace Hazardous Materials Identification System Standards (CPR 4). SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System ��MAXIM WASHROOM SENSE AT USE DILUTION (1:8) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Degreaser 707 AODA.pdf ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Degreaser 707 Product Code: 400500 Recommended Use: Water based degreaser Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 ASPIRATION HAZARD Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H304 May be fatal if swallowed and enters airways. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P301 + P330 + P331 + P316 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68439 111 Sodium Metasilicate 6834 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect thems elves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Small amounts swallowed incidental to normal handling operations are not likely to cause injury. May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. Note to Physicians Treatment based on sound judgment of physician and individual reactions of patient. Due to structural analogy and clinical data, this material may have a mechanism of intoxication similar to ethylene glycol. On that basis, treatment similar to ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, dry chemical. Unsuitable Extinguishing Media: Direct water stream. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Flammable hydrogen may be generated from contact with metals such as aluminum. Avoid contact with nitrites, strong acids, halogenated hydrocarbons. Hazardous Decomposition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Othe rwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30oC (86oF) and keep from freezing. Do not store in aluminum, copper, copper alloys and galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical or g ood general ventilation. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or chemical goggles. Face shiel d if splashing hazard exists. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Rubber boots. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liquid. Odour: No added fragrance. Odour threshold: N/A pH: 12.0 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Avoid contact with acid/oxidizers. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Metals such as aluminum, brass, copper. Nitrites, strong acids, halogenated hydrocarbons Hazardous Decomposition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: % of the components are classified as aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Alcohol Ethoxylate (CAS# 68439 3): (algae) 100 mg/L, Exposure Time: 72 h, Test Type: N/ Alcohol Ethoxylate (CAS# 68439 3): ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fish Species: (fish) 10 mg/L, Exposure Time, 96 h, Test Type: N/A Butoxyethanol (CAS# 111 (Lepomis macrochirus) 1490 mg/L, Exposure Time: 96 h, Test Type: Static Sodium Metasilicate (CAS# 6834 0): (Brachydanio rerio) 210 mg/L, Exposure Time: 96h, Test Type: semi static Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Butoxyethanol (CAS# 111 2): (Daphnia magna (water flea)): �1000 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight HMIS Health ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION 0 = Insignificant Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program ��MAXIM DEGREASER 707 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Digest AODA.pdf ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Digest Product Code: 400575 Recommended Use: Bacterial based grease trap cleaner Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SENSITIZATION – SKIN - Category 1 A EYE DAMAGE/IRRITATION – Category 2A Label Elements: Signal word: WARNING Hazard Statement: H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. PRECAUTIONARY STATEMENTS Prevention: P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P264 Wash hands and affected area thoroughly after handling. P280 Wear eye protection/ face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occurs: Get medical help. ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P321 Specific treatment (see supplemental first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P337 + P31 If eye irritation persists: Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68439 1,2 Benzisothiazolin one 0.1 2634 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with soap and water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is un conscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contami nation. Most Important Symptoms/ Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Effects, Acute and Delayed: Eyes and skin May cause serious eye irritation. May cause an allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Not available. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use of water spray when fighting fire may be inefficient. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon oxides Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Avoid dust formation. Sweep up material and dispose into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial , State or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOS URE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOS URE CONTROLS / PERSONAL PROTECTION INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves if user is allergic to this product. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Not required for normal use of product. However, use chemical Respiratory Pr otection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Milky white liquid Odour: Fresh scent Odour threshold: N/A pH: 6.5 7.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.00 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES VOCs% N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong acids and bases, strong oxidizing agents may react with product and de nature stable enzymes and inactivate bacterial cultures. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Causes serious eye irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 0.0175 % of the components are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Alcohol Ethoxylate (CAS# 68439 3): algae) 100 mg/L, Exposure Time: h, Test Type: N/A Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): fish ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: Alcohol Ethoxylate (CAS# 68439 3): Readily biodegradable. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not Regulated UN Proper Shipping Name: Not Regulated Transport Hazard Class(es): Not Regulated Packing Group: Not Regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research o n Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM DIGEST SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Citrus Power AODA.pdf ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Citrus Power Product Code: 1400280 Recommended Use: Heavy duty alkaline orange oil degreaser Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS – Category 1 FLAMMABLE LIQUIDS – Category 3 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 SENSITIZATION – SKIN – Category 1 CARCINOGENICITY – Category 2 ASPIRATION HAZARD – Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H226 Flammable liquid and vapour. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H317 May cause an allergic skin reaction. H371 May cause damage to organs. ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION H351 Suspected of causing cancer. H304 May be fatal if swallowed and enters airways. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion proof equipment. P242 Use non sparking tools. P243 Take action to prevent static di scharges. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P270 Do not eat, drink or smoke when using this product. P203 Obtain, read and follow all safety instructions before use. Responses: P390 Absorb spillage to prevent material damage. P303 + P361 + P354 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. Rinse affected areas with water [or shower]. P333 + P317 If skin irritation or rash occurs: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P370 + P378 In case of fire: Use Water fog, alcohol foam, or dry chemical to extinguish. P301 + P330 + P331 + P316 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplement first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P308 + P316 IF immediately. Storage: P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P235 Store in a well ventilated place. Keep cool. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68131 Sodium Hydroxide 1310 Tetrasodium Salt of Limonene 5989 Trisodium Nitrilotriacetate 0.1 5064 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with soap and water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. D’Limonene is a known skin sensitizer. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Aspiration hazard. Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing c onsciousness, or is convulsing. Call a Physician or Poison Control Center immediately. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect t hemselves and prevent spread of contamination. Most Important Symptoms/ Ingestion: Aspiration into lungs may cause vomiting and lung injury. Inhalation: Aspiration into lungs can cause lung injury. Inhaling may cause dizziness and drowsiness. ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Effects, Acute and Delayed: Eyes and skin Corrosive to eyes and skin. May cause an allergic skin reaction if user is allergic to d limonene. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Water spray. Flammability: Flammable liquid and vapor. Flash Point: C Pensky Martin Closed Cup. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Avoid heat, flames and sparks. Avoid contact with Aldehydes, halogens, strong acids, strong oxidizing agents, alkalis, amines, ethylene oxide, halogenated hydrocarbons, isocyanates, do not use with aluminum equipment at temperatures abov e 50 Hazardous Decomposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accord ance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C and keep from freezing. Back to Top ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Synthetic apron. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Splash goggles. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear orange liquid. Odour: Orange, citrus scent. Odour threshold: N/A pH: �13 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: C (Pensky Martin Closed Cup) Evaporation Rate (Water=1): N/A Flammability: Flammable liquid and vapour Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 0.97 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: N/A Decomposition temperature: N/A Viscosity N/A ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: This product is flammable. Conditions to avoid: Avoid heat, flames and sparks. Do not use with aluminum equipment at temperatures above 50 Incompatibility: Avoid contact with Aldehydes, halogens, strong acids, strong oxidizing agents, alkalis, amines, ethylene oxide, halogenated hydrocarbons, isocyanates. Hazardous Decomposition Products: Oxides of carbon Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Inhalation may cause drowsiness and dizziness. Corrosive to skin and eyes. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 26.2% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 0.485% Trisodium Nitrilotriacetate (CAS# 5064 3) which is listed as Group 2B carcinogen by IARC. Aspiration Hazard: 26.2% of the ingredients are classified as an aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Limonene (CAS# 5989 5): (Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fish Species: Limonene (CAS# 5989 5): (Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1993 UN Proper Shipping Name: Flammable Liquid, N.O.S. (D limonene) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM CITRUS POWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim No.1 Remover AODA.pdf ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim #1 Remover Product Code: 1300531 Recommended Use: Maximum performance stripper Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P271 Use only outdoors or in a well ventilated area. ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Metasilicate 6834 Sodium Hydroxide 1310 Monoethanolamine 141 Sodium (C14 16) Olefin Sulfonate 68439 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or other proper respi ratory medical device. Call a POISON CENTER or doctor/physician if feeling unwell. ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Skin Contact: Take off all contaminated clothing immediately . Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be tr eated by a physician. Wash contaminated clothing before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Self Protection of the First Aider: Remove all sources of ignition . Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Small amounts swallowed incidental to norm al handling operations are not likely to cause injury. May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, dry chemical. Unsuitable Extinguishing Media: Direct water stream. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Flammable hydrogen may be generated from contact with metals such as aluminum. Avoid contact with nitrites, strong acids, halogenated hydrocarbons. Hazardous Decomposition Products: Hydrogen, ammonia, aldehydes, ketones, organic acids. Back to Top ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30oC and keep from freezing. Do not store in aluminum, copper, copper alloys and galvanized containers. Back to Top SECTION 8: EXPOS URE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical or g ood general ventilation. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the tas k being performed and the risks involved. Eye and Face Protection: Safety glasses or chemical goggles. Face shield if splashing hazard exists. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colo rless liquid. ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odour: Mild odor. Odour threshold: N/A pH: 12.0 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.06 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Avoid contact with acid/oxidizers. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Metals such as aluminum, brass, copper. Nitrites, strong acids, halogenated hydrocarbons Hazardous Decomposition Products: Hydrogen, ammonia, aldehydes, ketones, organic acids. Back to Top ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 0.03% Diethanolamine (CAS# 111 2) which is listed as Group 2B carcinogen by IARC. Aspiration Hazard: Data available on components indicates n o potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: Sodium Metasilicate (CAS# 6834 0): (Brachydanio rerio) 210 mg/L, Exposure Time: 96h, Test Type: semi static Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1760 UN Proper Shipping Name: CORROSIVE LIQUID, N.O.S. (ethanolamine) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System ��MAXIM #1 REMOVER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user t o provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of thi s product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Grease Thief AODA.pdf ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 8 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim rease Thief Product Code: 13005 Recommended Use: Biological based grout and floor cleaner Restrictions on Use: For Food plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufact urer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION – Category 2B SENSITIZATION – SKIN – Category 1 Symbol: Signal word: WARNING Hazard Statement: H320 Causes eye irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P261 Avoid breathing mist/ spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplement first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 Viable Bacteria Cultures Not Applicable Perfume 0.1 Mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Show this saf Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Most Important Symptoms/ Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Effects, Acute an d Delayed: Eyes and skin Causes eye irritation. May cause an allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Prod ucts: Oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Feder al regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Not required under normal use condition. Butyl rubber, neoprene, latex, or nitrile gloves if user is allergic to this product. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: Not required under normal use condition. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, green colour liquid Odour: Citrus scent. Odour threshold: N/A pH: 7.5 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water. Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong acids or alkali compounds and strong oxidizing agents may inactive biological cultures. Hazardous Decomposition Products: None known. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Irritating to eyes. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: % of the component are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety glasses HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate ��MAXIM REASE THIEF SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Non-Toxic Multipurpose Degreaser AODA.pdf ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Non toxic Multipurpose Degreaser Product Code: 1300712 Recommended Use: Ecologo certified multi purpose cleaner. Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.co Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 Back to Top ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minu tes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reaso nably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Material can splatter above 100 C. Dried product can burn. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides, hydrochloric acid. Back to Top ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Not required. Eye and Face Protection: Not required. Respiratory Protection: Not required. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Yellow, clear liquid Odour: No added fragrance Odour threshold: N/A pH: 11.0 11.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Oxidizing materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides, hydrochloric acid. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components i ndicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo M program under UL2759. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate HMIS Health ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Slight Insignificant Flammability Reactivity Personal protection A = Safety glasses HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program ��PROJECT CLEAN NON TOXIC MULTIPURPOSE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Bleach 12 AODA.pdf ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Bleach 12 Product Code: 900100 Recommended Use: 12% Bleach solution for cleaning & sanitizing Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists . P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: 390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hypochlorite 7681 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Can release corrosive chlorine gas. Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Symptoms of pulmonary edema can be delayed up to 48 hours of exposure. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a s trong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemic al reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES emergency room. The person should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a b andage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anyt hing by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning of mouth and throat, abdominal cramps, nausea, vomiting, diarrhea, shock. May lead to convulsions, coma, and even death. Inhalation: ritant of the nose and throat, causing coughing, difficulty breathing, and pulmonary edema. Eyes and skin Corrosive injury. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam. Unsuitable Extinguishing Media: Do not use dry chemical fire extinguishing agents containing ammonium compounds (such as some A:B:C agents), since explosive compound can be formed. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Closed containers exposed to heat may explode. Spilled material may cause floor slippery. Reacts with ethyleneimine, primary amines, urea, ammonium salts, Hazardous Decomposition Products: Thermal decomposition products are toxic and may include oxide of chlorine and sodium. Back to Top ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste contain er. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Small spills of sodium hypochlorite solutions can be broken down by covering it with a sodium thio sulfate, sodium metabisulfite or ferrous salt. Diluted sulphuric acid could be added to speed up the reaction. Transfer the mixture into a large container of water and n eutralize mixture with soda ash. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Ventilate area if possible. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C (86 F) and keep from freezing. Do not mix with acid/ammonia. Back to Top SECTION 8: EXPOSURE CONTROLS / PER SONAL PROTECTION EXPOSURE LIMITS: Sodium Hypochlorite CAS No.: 7681 Regulation: AIHA Type of Listing: STEL Value: 2mg/m (15 minutes) Chlorine CAS No.: 7782 Regulation: ACGIH Type of Listing: TLV TWA Value: 0.5 ppm INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PER SONAL PROTECTION Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light yellow/green colour Odour: Pungent, chlorine odo Odour Threshold N/A pH: 10.8 11.2 Melting Point /Freezing Point (5% solution) Initial Boiling Point and Boiling Range Slowly decomposes above 40 Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower Flammability or Explosive Limits None Vapor Pressure Does not form a vapour Vapor Density N/A Relative Density /Specific Gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition Coefficient octanol/water: Log P 3.42 (estimated) Auto ignition Temperature Not flammable Decomposition Temperat ure Slowly decomposes above 40 Viscosity N/A VOCs% N/A Back to Top ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical Stability Unstable under normal storage conditions. Sodium hypochlorite solution decompose slowly. Decomposition accelerated by heat (above 40 C) and light. Possibility of Hazardous Reactions Avoid contact with acid or ammonia Conditions to Avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Avoid contact with strong reduci ng agents, organic compounds, ewis or mineral acid, methanol acid, ammonia, urea. Avoid sunlight. Incompatibility: Incompatible with acid, nickel, tin, copper, manganese, iron, ammonia, urea and other organic compounds. Hazardous Decomposition Products: Chlorine gas, oxide of sodium , h ydrochloric acid Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. May cause productive cough, running nose, redness, pain and drying and cracking of skin. Acute exposure may cause irritation of nose, throat and respiratory trace. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: pochlorite salts are listed as Group 3 Carcinogen by I ARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Isolated cases of allergic skin reactions have been reported following handling of sodium hypochlorite solutions. However, the cases are insufficiently documented and affected persons having multiple sensitization . In any case, the number of cases is so small in the context of the extensive use of sodium hypochlorite solutions in industry and in the home that an allergenic effect is assumed not to occur. Back to Top ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Hypochlorite (CAS# 7681 Red alga mg/L, Exposure Time, h, Test Type: N/A Toxicity to Fish Species: Sodium Hypochlorite (CAS# 7681 9): Salmo gairdneri 0.07 mg/L, Exposure Time, h, Test Type: N/A Toxicity to Aquatic Invertebrates: Sodium Hypochlorite (CAS# 7681 9): Daphnia magna 0.0 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: HYPOCHLORITE SOLUTION (more than 7 percent available chlorine) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not listed as a marine pollutant under Canadian TDG Regulations, schedule III. Special Precautions for User: Not avail able. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: EGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: EGULATORY INFORMATION C = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified ��MAXIM BLEACH 12 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Sprayaway AODA.pdf ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Sprayaway Product Code: 140129 Recommended Use: Vehicle wash de tergent Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 ASPIRATION HAZARD Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H304 May be fatal if swallowed and enters airways. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P301 + P330 + P331 + P316 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number 111 Alcohol Ethoxylate 68439 - 7 64 02 8 Sodium Metasilicate 6834 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect thems elves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Small amounts swallowed incidental to normal handling operations are not likely to cause injury. May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. Note to Physicians Treatment based on sound judgment of physician and individual reactions of patient. Due to structural analogy and clinical data, this material may have a mechanism of intoxication similar to ethylene glycol. On that basis, treatment similar to endotracheal and/or esophageal control. Danger from lung aspiration must be ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES weighed against toxicity when considering emptying the stomach. Treatment of exposure should be directed at t he control of symptoms and the clinical condition of the patient. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, dry chemical. Unsuitable Extinguishing Media: Direct water stream. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Flammable hydrogen may be generated from contact with metals such as aluminum. Avoid contact with nitrites, strong acids, halogenated hydrocarbons. Hazardous Decomposition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Othe rwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30oC (86oF) and keep from freezing. Do not store in aluminum, copper, copper alloys and galvanized containers. Back to Top ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical or g ood general ventilation. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or chemical goggles. Face shiel d if splashing hazard exists. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Rubber boots. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, red liquid. Odour: Cherry fragrance. Odour threshold: N/A pH: 12.0 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Decomposition temperature: N/A Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Avoid contact with acid/oxidizers. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Metals such as aluminum, brass, copper. Nitrites, strong acids, halogenated hydrocarbons Hazardous Decomposition Products: Oxides of sodium, carbon, and other unidentifiable organic compounds. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE� 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: % of the components are classified as aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Alcohol Ethoxylate (CAS# 68439 3): (algae) 100 mg/L, Exposure Time: 72 h, Test Type: N/ ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): (fish) 10 mg/L, Exposure Time, 96 h, Test Type: N/A Butoxyethanol (CAS# 111 (Lepomis macrochirus) 1490 mg/L, Exposure Time: 96 h, Test Type: Static Sodium Metasilicate (CAS# 6834 0): (Brachydanio rerio) 210 mg/L, Exposure Time: 96h, Test Type: semi static Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Butoxyethanol (CAS# 111 2): (Daphnia magna (water flea)): �1000 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate HMIS Health ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION 1 = Slight 0 = Insignificant Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program ��MAXIM SPRAYAWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Nu Break 8 AODA.pdf ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Nu Break 8 Product Code: 1400980 Recommended Use: Concentrated degreaser Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 ACUTE TOXICITY ORAL Category 4 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H302 Harmful if swallowed. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P270 Do not eat, drink or smoke when using this product. ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P280 Wear protective gloves/ protective clothing/ eye protection/ face protection Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P363 Wash contaminated clothing before reuse. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Storage: P406 Store in a corro sion resistant container with a resistant inner liner. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Potassium Hydroxide 1310 Alcohol Ethoxylates 68154 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES a chemical reaction that worsens t he burn. Don't put antibiotic ointment on the burn. Eye Contact: Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the si de. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor, or you arrive in an emergency room. The person should keep the eye open as wid e as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. Whil e waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to prot ect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: May cause respiratory irritation. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: eacts violently with many organic chemicals, especially nitro carbons and chlorocarbons. May react with zinc, aluminum, tin and other active metals liberating ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES flammable hydrogen gas. Dilution in water evolves large amount s of heat. Hazardous Decomposition Products: Oxides of sodium and other unidentifiable organic compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reus e if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable gloves (rubber, nitrile) recommended. Rubber/PVC aprons when skin contact may occur. Rubber boots. Eye and Face Protection: Use chemical gogg les or safety glasses. Respirator y Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liq uid. Odour: Mild odo r. No added fragrance. Odour threshold: N/A pH: �13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.2 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Avoid contact with acid/oxidizers. Incompatible with acid, metals and alloys, zinc, tin, aluminum, organic chemicals, nitrocarbons, halocarbons. Hazardous Decomposition Products: Oxides of sodium and other unidentifiable organic compounds Back to Top ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Necrosis, tissue destruction, corrosion. Acute Toxicity Estimates: Oral ATE 1737 mg/kg, 6.74 % of the mixture consists of ingredients of unknown acute toxicity Dermal ATE� 2000 mg/kg , 19.06 % of the mixture consists of ingredients of unknown acute toxicity Inhalation ATE: N/A Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1824 UN Proper Shipping Name: SODIUM HYDROXIDE SOLUTION Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety Glasses + Gloves Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM NU BREAK 8 SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Sa fety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Liquifresh AODA.pdf ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Liquifresh Product Code: 1300690 Recommended Use: Quat based c herry scent deodorizer Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards FLAMMABLE LIQUIDS Category Health Hazards: SENSITIZATION SKIN Category 1 SKIN CORROSION/ IRRITATION Category 2 EYE DAMAGE/IRRITATION Category Label Elements: Signal word: DANGER Hazard Statement: H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H315 Causes skin irritation. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion proof equipment. ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P242 Use non sparking tools. P243 Take action to prevent static discharges. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P264 Wash hands and affected area thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. Responses: P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P302 + P352 + P333 + P317 IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical help. P321 Specific treatment (see supplemental first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 + P317 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P370 + P378 In case of fire: Use water fog, alcohol foam or dry c hemical to extinguish. Storage: P403 + P235 Store in a well ventilated place. Keep cool. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Isopropyl Alcohol Alcohol Ethoxylate 68439 Perfume Mixture Al kyl ( 68% C12, 32% C14) dimethyl ethylbenzyl ammonium chloride) 1.5 85409 Back to Top ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with soap and water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if pr esent and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mout h if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. Eyes and skin Irritating to skin. Corrosive to eyes . May cause an allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Not available. Flammability: Flammable liquid and vapours. Flash Point: (PMCC) Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use of water spray when fighting fire may be inefficient. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon oxides Back to Top ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Avoid dust formation. Sweep up material and dispose into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial , State or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves if user is allergic to this product. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Not required for normal use of product. However, use chemical Respiratory Pr otection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, hot pink liquid. Odour: Cherry s cent. ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odour threshold: N/A pH: 5.5 6.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: (PMCC) Evaporation Rate (Water=1): N/A Flammability: Flammable liquid and vapours. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.00 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not determined. Decomposition temperature: N/A Viscosity Thin like water. VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong acids and bases, strong oxidizing agents may react with product and de nature stable enzymes and inactivate bacterial cultures. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Causes serious eye damage. ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: % of the components are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Alcohol Ethoxylate (CAS# 68439 3): algae) 100 mg/L, Exposure Time: h, Test Type: N/A Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): fish mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: Alcohol Ethoxylate (CAS# 68439 3): Readily biodegradable. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not Regulated UN Proper Shipping Name: Not Regulated Transport Hazard Class(es): Not Regulated Packing Group: Not Regulated Environmental Hazards: Not available. ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System ��MAXIM LIQUIFRESH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION IARC International Agency for Research o n Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Hyper Concentrate Enzyme Detergent AODA - Copy.pdf ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Hyper Concentrate Product Code: Recommended Use: Liquid laundry detergent Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION – Category 2 EYE DAMAGE/IRRITATION – Category 1 SENSITIZATION – SKIN – Category 1 CARCINOGENICITY – Category 2 Label Elements: Signal word: Danger Hazard Statement: H315 Causes skin irritation. H318 Causes serious eye damage H317 May cause an allergic skin reaction. H351 Suspected of causing cancer PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 If skin irritation or rash occur: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68439 Benzenesulfonic acid, mono C10 alkyl derivatives, compounds with 2 aminoethanol 68910 Propylene Glycol Coconut Diethanolamide 68603 Sodium Lauryl Sulfate 151 Enzyme blend mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of c lean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid pe rsonnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. May cause serious allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: The smoke may contain unidentified toxic and/or irritating compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industr ial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatur es below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable chemically resistant gloves (rubber, nitrile). Eye and Face Protection: Normally not required. Use chemical goggles or safety glasses when eye contact may occur Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear/hazy blue, slightly viscous liquid Odour: Pleasant scent Odour threshold: N/A pH: 8.5 9.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Avoid strong oxidizers, strong acids, strong bases. Incompatibility: Strong oxidizers, strong reducing agents, acids, bases. Hazardous Decomposition Products: Oxides of carbon. Oxides of sodium. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Irritation to eyes and skin. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 0.21% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. Back to Top ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: Coconut Diethanolamide (CAS# 68603 9): (Daphnia magna) 3.3 mg/L, Exposure Time, N/A, Test Type: Static Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��PROJECT CLEAN HYPER CONCENTRATE ENZYME DETERGENT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Low-Maintenance Floor Finish AODA.pdf ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Low Maintenance Floor Finish Product Code: Recommended Use: Acrylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fre sh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of cont amination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. spiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��PROJECT CLEAN LOW MAINTENANCE FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPD ATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Blue Cream Cleanser AODA.pdf ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Blue Cream Cleanser Product Code: Recommended Use: Hard surface polisher, cleaner. Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION Category EYE DAMAGE/IRRITATION Category Label Elements: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P332 + P313 If skin irritation occurs: Get medical advice/attention. ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P337 + P313 If eye irritation persists: Get medical advice/attention. P321 Specific treatment (see supplemental first aid information on this label). P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Calcium Carbonate 471 Sodium Dodecylbenzenesulfonate 25155 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of th material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Irritating to eyes and skin. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Product not flammable. Use extinguishing media suitable for surrounding fires. Unsuitable Extinguishing Media None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including NIOSH/MSHA approved breathing apparatus. Use water spray to cool all nearby fire exposed surfaces Unusual Fire / Explosion Hazards: None known Hazardous Decomposition Products: Oxides of carbon Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered materia l in accordance with all local, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Store at temperatures below 30 and ab ove 5 containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selec ted based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: None required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pale blue, opaque gel. Odour: Lime fragrance. Odour threshold: N/A pH: 8.0 9.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapor pressure: N/A Vapor density: N/A Relative density/Specific gravity (Water = 1): @ 20 ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 15000 20000 cP VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 Incompatibility: Oxidizing agents. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin contact, skin absorption, eye contact, inhalation, ingestion Symptoms: SKIN CONTACT: Causes skin irritation. EYE CONTACT: Causes serious eye irritation. INHALATION: May cause respiratory irritation. INGESTION: May be harmful if swallowed. May cause gastrointestinal irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SE CTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��PROJECT CLEAN BLUE CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liabilit y for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Chlorinated Laundry Bleach AODA.pdf ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Chlorinated Laundry Bleach Product Code: Recommended Use: 12% Bleach solution for laundry machines Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists . P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: 390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hypochlorite 7681 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Can release corrosive chlorine gas. Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Symptoms of pulmonary edema can be delayed up to 48 hours of exposure. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don 't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could caus e a chemical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that t he injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES emergency room. The per son should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning of mouth and throat, abdominal cramps, nausea, vomiting, diarrhea, shock. May lead to convulsions, coma, and even death. Inhala tion: Irritant of the nose and throat, causing coughing, difficulty breathing, and pulmonary edema. Eyes and skin Corrosive injury. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam. Unsuitable Extinguishing Media: Do not use dry chemical fire extinguishing agents containing ammonium compounds (such as some A:B:C agents), since explosive compound can be formed. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Closed containers exposed to heat may explode. Spilled material may cause floor slippery. Reacts with ethyleneimine, primary amines, urea, ammonium salts, Hazardous Decomposition Products: Thermal decomposition products are toxic and may include ox ide of chlorine and sodium. Back to Top ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Fed eral regulations. Small spills of sodium hypochlorite solutions can be broken down by covering it with a sodium thiosulfate, sodium metabisulfite or ferrous salt. Diluted sulphuric acid could be added to speed up the reaction. Transfer the mixture into a l arge container of water and n eutralize mixture with soda ash. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Ventilate area if possible. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C (86 F) and keep from freezing. Do not mix with acid/ammonia. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: Sodium Hypochlorite CAS No.: 7681 Regulation: AIHA Type of Listing: STEL Value: 2mg/m (15 minutes) Chlorine CAS No.: 7782 Regulation: ACGIH Type of Listing: TLV TWA Value: 0.5 ppm INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light yellow/green colour Odour: Pungent, chlorine odo Odour Threshold N/A pH: 10.8 11.2 Melting Point /Freezing Point C (5% solution) Initial Boiling Point and Boiling Range Slowly decomposes above 40 Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower Flammability or Explosive Limits None Vapor Pressure Does not form a vapour Vapor Density N/A Relative Density /Specific Gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition Coefficient octanol/water: Log P 3.42 (estimated) Auto ignition Temperature Not flammable Decomposition Temperature Slowly decomposes above 40 Viscosity N/A VOCs% N/A ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical Stability Unstable under normal storage conditions. Sodium hypochlorite solution decompose slowly. Decomposition accelerated by heat (above 40 C) and light. Possibility of Hazardous Reactions Avoid contact with acid or ammonia Conditions to Avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Avoid contact with strong reducing agents, organic compounds, ewis or mineral acid, methanol acid, ammonia, urea. Avoid sunlight. Incompatibili ty: Incompatible with acid, nickel, tin, copper, manganese, iron, ammonia, urea and other organic compounds. Hazardous Decomposition Products: Chlorine gas, oxide of sodium , h ydrochloric acid Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. May cause productive cough, running nose, redness, pain and drying and cracking of skin. Acute exposure may cause irritation of nose, throat and respiratory trace. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: pochlorite salts are listed as Group 3 Carcinogen by I ARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Isolated cases of allergic skin reactions have been reported following handling of sodium hypochlorite solutions. However, the cases are insufficiently documented and affected persons having multiple sensitization. In any case, the number of cases is so small in the context of the extensive use of sodium hypochlorite solutions in industry and i n the home that an allergenic effect is assumed not to occur. Back to Top ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Hypochlorite (CAS# 7681 Red alga mg/L, Exposure Time, h, Test Type: N/A Toxicity to Fish Species: Sodium Hypochlorite (CAS# 7681 9): Salmo gairdneri 0.07 mg/L, Exposure Time, h, Test Type: N/A Toxicity to Aquatic Invertebrates: Sodium Hypochlorite (CAS# 7681 9): Daphnia magna 0.0 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: HYPOCHLORITE SOLUTION (more than 7 percent available chlorine) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not listed as a marine pollutant under Canadian TDG Regulations, schedule III. Special Precautions for User: Not avail able. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION C = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified ��PROJECT CLEAN CHLORINATED LAUNDRY BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Oxygenic AODA.pdf ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Oxygenic Product Code: 1300830 Recommended Use: Ecologo certified concentrated peroxide based cleaner Canada Drug Identification Number (DIN) # 02 497271 Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITATION – Category 2A EYE DAMAGE/ IRRITATION – Category 2A SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P280 Wear eye protection and protective gloves. P261 Avoid breathing fume/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 + P362 + P364 If skin irritation or rash occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical hel p if you feel unwell. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrogen Peroxide 7722 Alcohol Ethoxylate 68991 Limonene 0.1 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 mi nutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during f lushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Irri tating to eyes and skin. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, dry chemical powder, carbon dioxide. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Do not use CO extinguisher on this material. Unusual Fire / Explosion Hazards: Not flammable but can cause spontaneous combustion of flammable materials and continued support of the combustion because it liberates oxygen as it decomposes. Drying of concentrated product on clothing or other combustible material may cause fire. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing Do not store in metal or galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and t he risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liquid. Odour: Citrus scent. Odour threshold: N/A pH: 5.5 6.5 ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 and below 5 C. Keep away from heat, sparks and flame. Avoid hot work and sources of ignition or on near empty containers. Incompatibility: Oxidizing agents, iron, copper, brass, bronze, chromium, zinc, lead, silver, manganese. Contact with combustible material may result in spontaneous combustion. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Symptoms: May cause serious irritation to eyes and skin. May cause irritation to respiratory track limonene is a known skin sensitizer. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: This product contains roughly 0. % of D Limonene (CAS# 5989 5) which is a known skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Limonene (CAS# 5989 5): (Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static Toxicity to Fish Species: Limonene (CAS# 5989 5): (Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A (Lepomis macrochirus) 56 mg/L, Exposure Time, 96 h, Test Type: Static (Oncorhynchus mykiss) 10.0 32.0 mg/L, Exposure Time, 96 h, Tes t Type: Static Alcohol Ethoxylate (CAS# 68991 0): (Fish) 70.1 mg/L, Exposure Time, 48h, Test Type: Static Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): 32 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68991 0): (Daphnia magna (water flea)): ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION 5.3 mg/L, Exposure Time: 48h, Test Type: N/A Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo program under UL27 Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: PESTICIDE DISPOSAL Pesticide wastes are acutely azardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. CONTAINER DISPOSAL Non refillable container. Do not reuse or refill this container. Offer for recycling, if available or puncture and dispose of in a sanitary landfill (For containers 5 gallons or less): Triple rinse container promptly after emptying. Triple rinse as follows: Empty the remaining contents into ap plication equipment or a mix tank and drain for 10 seconds after flow begins to drip. Fill container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drai n for 10 seconds after the flow begins to drip. Repeat this procedure two more times. (For containers greater than 5 gallons): Triple rinse container promptly after emptying. Triple rinse as follows: Empty remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end d tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Environmental Hazards: Not available. Special Precautions for User Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration ��MAXIM OXY GENIC SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Morning Mist AODO.pdf ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 8 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Morning Mist Product Code: 1300711 Recommended Use: Berry scented hand soap Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITAITON – Category 2 EYE DAMAGE/ IRRITATION – Category 1 Symbol: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 8 Causes serious eye damage . PRECAUTIONARY STATEMENTS Prevention: P264 Wash and rinse skin thoroughly after handling. P280 Wear protective gloves/ eye protection/ face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation occurs P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sulfuric Acid, Mono C10 Alkyl Esters, Sodium Salts 68585 Sodium (C14 16) Alpha Olefin Sulfonate 68439 Alkyl (C10 16) Ether Sulfate, Sodium Salt 68585 Perfume 0.5 1.5 Mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medi cal attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contac t may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazard ous Decomposition Products: Oxides of carbon, oxides of nitrogen. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in acco rdance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pearly pink , opaque liquid Odour: Berry fragrance. Odour threshold: N/A pH: 6.0 8.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 2000 3000 cP @ 20 VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Incompatibility: Strong oxidizers, strong acids. flammable liquid, explosive, pyrophoric substances, ammonium nitrate, organic peroxides. Hazardous Decomposition Products: Oxides of carbon, oxides of nitrogen. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage. Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensi tization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Data available on components indicates no potentia carcinogenicity. Aspiration Hazard: Data available on components indicates no potent aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate ��MAXIM LIQUID HAND SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Sa fety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Prozyme Liquid Laundry AODA.pdf ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Pro yme Liquid Laundry Product Code: 1201100 Recommended Use: Liquid laundry detergent Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION – Category 2 EYE DAMAGE/IRRITATION – Category 1 SENSITIZATION – SKIN – Category 1 CARCINOGENICITY – Category 2 Label Elements: Signal word: Danger Hazard Statement: H315 Causes skin irritation. H318 Causes serious eye damage H317 May cause an allergic skin reaction. H351 Suspected of causing cancer PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 If skin irritation or rash occur: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68439 Benzenesulfonic acid, mono C10 alkyl derivatives, compounds with 2 aminoethanol 68910 Propylene Glycol Coconut Diethanolamide 68603 Sodium Lauryl Sulfate 151 Enzyme blend mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victi m is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect t hemselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. May cause serious allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: The smoke may contain unidentified toxic and/or irritating compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on s kin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable chemically resistant gloves (rubber, nitrile). Eye and Face Protection: Normally not required. Use chemical goggles or safety glasses when eye contact may occur Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear/hazy blue, slightly viscous liquid Odour: Pleasant scent Odour threshold: N/A pH: 8.5 9.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Avoid strong oxidizers, strong acids, strong bases. Incompatibility: Strong oxidizers, strong reducing agents, acids, bases. Hazardous Decomposition Products: Oxides of carbon. Oxides of sodium. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Irritation to eyes and skin. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 0.21% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. Back to Top ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: Coconut Diethanolamide (CAS# 68603 9): (Daphnia magna) 3.3 mg/L, Exposure Time, N/A, Test Type: Static Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM PR OZYME LIQUID LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Almond Scented Toilet Bowl Cleaner AODA.pdf ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Almond Scented Toilet Bowl Cleaner Product Code: Recommended Use: Acid Toilet Bowl and Urinal Cleaner Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P271 Use only outdoors or in a well ventilated area. ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrochloric Acid 7647 Oxalic Acid 144 Amines, Tallow Alkyl, Ethoxylate 61791 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 20 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder befo re reuse. Eye Contact: Immediately flush with running water for at least 15 30 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediatel y. ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Eff ects, Acute and Delayed: Ingestion: Burn mouth and throat. May cause serious gastrointestinal irritation or ulceration. Inhalation: Severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Use extinguishing media suitable for surrounding fires. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: flammable/explosive hydrogen gas. Hazardous Decomposition Products: When heated to decomposition, emits toxic hydrogen chloride fumes and will react with water or steam to produce heat, toxic and corrosive fumes. Thermal oxidative decomposition produces toxic chlorine fumes and explosive hydrogen gas. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment including respiratory protection. Soak up spills with absorbents, the dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all loc al, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing acid vapor/mist. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children. Store at temperatures below 30 C (86 F). Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for spray/mist generated in confined areas. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves. Personal protective equipment for the body should be selected based on the task eing performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles, safety glasses or face shield. Respiratory Protection: Use NIOSH/MSHA approved respirator (for hydrochloric acid) when working with concentrated liquid. Other Protective Equipment: Back to Top SEC TION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Bluish green gel. Odour: Almond fragrance. Odour threshold: N/A pH: 1.0 Melting point/Freezing point: N/A ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SEC TION 9: PHYSICAL AND CHEMICAL PROPERTIES Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 3 g/ml Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 2000 3000 cP VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: Very corrosive to metals, releasing flammable hydrogen gas. Reacts violently with bases releasing heat. Reacts with reducing agents releasing heat and flammable hydrogen gas. Reacts with oxidizing agents releasing heat and toxic, corrosive chlorine gas. Re acts with cyanides releasing toxic cyanide gas. Reacts with sulphides releasing toxic hydrogen sulphide gas. Contact with explosives may cause detonation. Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Contact with metals, bases, oxidizing, reducing agents. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Bases, oxidizing agents, reducing agents, reactive metals , ammonia. Hazardous Decomposition Products: Carbon oxides, hydrogen chloride gas, chlorine gas, hydrogen gas. Back to Top ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin and eye contact, inhalation, ingestion. Symptoms: Acute Irritation and corrosion to eyes , skin and respiratory system. Danger of severe damage to eyes and lungs . Ingestion may cause damage to the gastrointestinal system. Acute Toxicity Estimates: (oral)� 2000 mg/kg (dermal )� 2000 mg/kg ATE mix (inhalation, mist) 0.05 0.5 mg/L Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. The Department of Health and Human Services (DHHS), the International Agency for Research on Cancer (IARC), and the EPA have not classified hydrogen chloride as to its carcinogenicity. IARC considers hydrochloric acid to be not classifiable as to its carcinogenicity to humans. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Hydrogen Chloride (CAS# 7647 0): (Desmodesmus subspicatus (green algae)) 0.0492 mg/L, Exposure Time: 72 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (algae) 100 mg/L, Exposure Time: 72 h, Test Type: N/A Toxicity to Fish Species: Hydrogen Chloride (CAS# 7647 0): (Cyprinus carpio (Common Carp)) 4.92 mg/L, Exposure Time, 96 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (fish) 10 mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Hydrogen Chloride (CAS# 7647 0): (Shrimp): 100 300 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1789 UN Proper Shipping Name: HYDROCHLORIC ACID Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 1L Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection Safety Glasses Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��PROJECT CLEAN ALMOND SCENTED TOILET BOWL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Laundry Neutralizer and Softener AODA (2).pdf ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of 8 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Non Toxic Tile & Grout Cleaner Product Code: Recommended Use: Biological based grout and floor cleaner Restrictions on Use: For Food plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufact urer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION – Category 2B SENSITIZATION – SKIN – Category 1 Symbol: Signal word: WARNING Hazard Statement: H320 Causes eye irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P261 Avoid breathing mist/ spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplement first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 Viable Bacteria Cultures Not Applicable Perfume 0.1 Mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Show this saf Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder bef ore reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immedia tely. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Most Important Symptoms/ Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Effects, Acute and Delayed: Eyes and skin Causes eye irritation. May cause an allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accord ance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Not required under normal use condition. Butyl rubber, neoprene, latex, or nitrile gloves if user is allergic to this product. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: Not required under normal use condition. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, green colour liquid Odour: Citrus scent. Odour threshold: N/A pH: 7.5 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water. Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong acids or alkali compounds and strong oxidizing agents may inactive biological cultures. Hazardous Decomposition Products: None known. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Irritating to eyes. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: % of the component are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on c omponents indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety glasses HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate ��PROJECT CLEAN NON TOXIC TILE & GROUT CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST U PDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ To xicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Satin Floor Finish AODA.pdf ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Satin Floor Finish Product Code: Recommended Use: Matte a crylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self otection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EX POSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on c omponents indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��PROJECT CLEAN SATIN FLOOR FINISH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max White AODA.pdf ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max White Product Code: 200695 Recommended Use: 12% Bleach solution for laundry machines Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists . P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: 390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hypochlorite 7681 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Can release corrosive chlorine gas. Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Symptoms of pulmonary edema can be delayed up to 48 hours of exposure. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a s trong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemic al reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES emergency room. The person should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a b andage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anyt hing by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning of mouth and throat, abdominal cramps, nausea, vomiting, diarrhea, shock. May lead to convulsions, coma, and even death. Inhalation: ritant of the nose and throat, causing coughing, difficulty breathing, and pulmonary edema. Eyes and skin Corrosive injury. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam. Unsuitable Extinguishing Media: Do not use dry chemical fire extinguishing agents containing ammonium compounds (such as some A:B:C agents), since explosive compound can be formed. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Closed containers exposed to heat may explode. Spilled material may cause floor slippery. Reacts with ethyleneimine, primary amines, urea, ammonium salts, Hazardous Decomposition Products: Thermal decomposition products are toxic and may include oxide of chlorine and sodium. Back to Top ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste contain er. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Small spills of sodium hypochlorite solutions can be broken down by covering it with a sodium thio sulfate, sodium metabisulfite or ferrous salt. Diluted sulphuric acid could be added to speed up the reaction. Transfer the mixture into a large container of water and n eutralize mixture with soda ash. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Ventilate area if possible. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C (86 F) and keep from freezing. Do not mix with acid/ammonia. Back to Top SECTION 8: EXPOSURE CONTROLS / PER SONAL PROTECTION EXPOSURE LIMITS: Sodium Hypochlorite CAS No.: 7681 Regulation: AIHA Type of Listing: STEL Value: 2mg/m (15 minutes) Chlorine CAS No.: 7782 Regulation: ACGIH Type of Listing: TLV TWA Value: 0.5 ppm INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PER SONAL PROTECTION Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light yellow/green colour Odour: Pungent, chlorine odo Odour Threshold N/A pH: 10.8 11.2 Melting Point /Freezing Point C (5% solution) Initial Boiling Point and Boiling Range Slowly decomposes above 40 Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower Flammability or Explosive Limits None Vapor Pressure Does not form a vapour Vapor Density N/A Relative Density /Specific Gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition Coefficient octanol/water: Log P 3.42 (estimated) Auto ignition Temperature Not flammable Decomposition Temperature Slowly decomposes above 40 Viscosity N/A VOCs% N/A ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical Stability Unstable under normal storage conditions. Sodium hypochlorite solution decompose slowly. Decomposition accelerated by heat (above 40 C) and light. Possibility of Hazardous Reactions Avoid contact with acid or ammonia Conditions to Avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Avoid contact with strong reducing agents, organic compounds, ewis or mineral acid, methanol acid, ammonia, urea. Avoid sunlight. Incompatibility: Incompatible with acid, nickel, tin, copper, manganese, iron, ammonia, urea and other organic compounds. Hazardous Decomposition Products: Chlorine gas, oxi de of sodium , h ydrochloric acid Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. May cause productive cough, running nose, redness, pain and drying and cracking of skin. Acute exposure may cause irritation of nose, throat and respiratory trace. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: pochlorite salts are listed as Group 3 Carcinogen by I ARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Isolated cases of allergic skin reactions have been reported following handling of sodium hypochlorite solutions. However, the cases are insufficiently documented and affected persons having multiple sensitization . In any case, the number of cases is so small in the context of the extensive use of sodium hypochlorite solutions in industry and in the home that an allergenic effect is assumed not to occur. Back to Top ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Hypochlorite (CAS# 7681 Red alga mg/L, Exposure Time, h, Test Type: N/A Toxicity to Fish Species: Sodium Hypochlorite (CAS# 7681 9): Salmo gairdneri 0.07 mg/L, Exposure Time, h, Test Type: N/A Toxicity to Aquatic Invertebrates: Sodium Hypochlorite (CAS# 7681 9): Daphnia magna 0.0 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: HYPOCHLORITE SOLUTION (more than 7 percent available chlorine) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not listed as a marine pollutant under Canadian TDG Regulations, schedule III. Special Precautions for User: Not avail able. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: EGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: EGULATORY INFORMATION C = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified ��MAXIM MAX WHITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo NeutraMax AODA.pdf ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean NeutraMax Product Code: Recommended Use: Ecologo certified, ready use floor cleaner Restrictions on Use: For industrial and commercial use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: NONE Label Elements: NO PICTOGRAM Signal word: NONE Hazard Statement: NON HAZARDOUS PRECAUTIONARY STATEMENTS Prevention: NOT REGULATED Responses: NOT REGULATED Storage: NOT REGULATED Disposal: NOT REGULATED Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symp toms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attent ion immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a P hysician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effe cts, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: None known. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical or g ood general ventilation. Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respiratory Protection: Not required under normal use condition. Other Protective Equipment: Not required under normal use condition. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Yellow , clear liquid. Odour: Mild musty odour (no added fragrance) Odour threshold: N/A pH: 9.5 10.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents. Hazardous Decomposition Products: None known. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: None reasonably foreseeable. Acute Toxicity Estimates: Oral:� 2000 mg/kg Dermal �: 2000 mg/kg Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: Readily biodegradable based on the components. This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plan t, bacteria) as required by the EcoLogo® program under UL2759. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not classified as a marine pollutant. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group Not required All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets ��PROJECT CLEAN NEUTRAMAX SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Div ision Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Citrus and Peroxide Degreaser AODA.pdf ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Citrus & Peroxide Degreaser Product Code: Recommended Use: Peroxide and limonene based cleaner/ degreaser Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITATION – Category 1 EYE DAMAGE/ IRRITATION – Category 1 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: DANGER Hazard Statement: H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P241 Use explosion proof equipment. P242 Use non sparking tools. P243 Take action to prevent static discharges. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P280 Wear eye protection and protective gloves. P260 Do not breathe dusts or mists. P271 Use only outdoors or in a well ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. Responses: P370 + P378 In case of fire: Use water fog, alcohol foam or dry chemical to extinguish. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 + P362 + P364 If skin irritation or rash occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with wate r for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P235 + P233 Store in a well ventilated place. Keep cool. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Hydrogen Peroxide 7722 C6 12 Alkyl Alcohol Ethoxylate Phosphoric Acid 68921 Limonene 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medic al attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contac Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of th e First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: Corrosive to eyes and skin Skin turns white upon contact. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, dry chemical powder, carbon dioxide. Unsuitable Extinguishing Media: None known. ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Flammability: Flammable liquid and vapours. Flash Point: (PMCC) Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Do not use CO extinguisher on this material. Unusual Fire / Explosion Hazards: Flammable. C an cause spontaneous combustion of flammable materials and continued support of the combustion because it liberates oxygen as it decomposes. Drying of concentrated product on clothing or other combustible material may cause fire. Hazardous Dec omposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing Do not store in metal or galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and t he risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: In case of insufficient ventilation, wear suitable res piratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liquid. Odour: Citrus scent. Odour threshold: N/A pH: 5.5 6.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: (PMCC) Evaporation Rate (Water=1): N/A Flammability: Flammable liquid and vapours. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 and below 5 C. Keep away from heat, sparks and flame. Avoid hot work and sources of ignition or on near empty containers. Incompatibility: Oxidizing agents, iron, copper, brass, bronze, chromium, zinc, lead, silver, manganese. Contact with combustible material may result in spontaneous combustion Hazardous Decomposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause serious irritation to eyes and skin. May cause irritation to respiratory track limonene is a known skin sensitizer. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: This product contains roughly 0. % of D Limonene (CAS# 5989 5) which is a known skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SE CTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Limonene (CAS# 5989 5): (Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static Toxicity to Fish Species: Limonene (CAS# 5989 5): Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SE CTION 12: ECOLOGICAL INFORMATION Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A (Lepomis macrochirus) 56 mg/L, Exposure Time, 96 h, Test Type: Static (Oncorhynchus mykiss) 10.0 32.0 mg/L, Exposure Time, 96 h, Test Type: Static Alcohol Ethoxylate (CAS# 68991 0): (Fish) 70.1 mg/L, Exposure Time, 48h, Test Type: Static Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): 32 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68991 0): (Daphnia magna (water flea)): 5.3 mg/L, Exposure Time: 48h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: UN1993 UN Proper Shipping Name: FLAMMABLE LIQUID, N.O.S . (d limonene) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User Not available. Additional Information: Limited Quantity Index: 5L Back to Top ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��PROJECT CLEAN CITRUS & PEROXIDE DEGREASER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Rep eated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liabilit y for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Silver Pre-Soak AODA.pdf ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Silver Pre Soak Product Code: Recommended Use: Pre soak for cutlery Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards None Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 SPECIFIC TARGET ORGAN TOXICITY SINGLE EXPOSURE Category 3 Symbol: Signal word: ANGER Hazard Statement: H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P260 Do not breath dust/fume/gas/mist/vapours/spray. P264 Wash hands and affected area thoroughly after handling. P280 Wear protective gloves/ eye protection/ face protection. Responses: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do not induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P363 Wash contaminated clothing before reuse. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P308 + P311 If exposed or concerned call a POISON CENTRE/doctor. P310 Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see supplemental first aid information on this label). Storage: P403 + P235 Store in a well ventilated place. Keep cool. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Carbonate 497 Trisodium Phosphate Dodecahydrate 10101 Sodium Tripolyphosphate 7758 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of th material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Corrosive to digestive track. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes and skin. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Use extinguishing media suitable for surrounding fires. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None. Hazardous Decomposition Products: Carbon oxides, phosphorous oxides, sodium oxides. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Avoid dust formation. Sweep up material and dispose into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in ac cordance with all local, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C. SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for dust generated in confined areas. Skin Protection: Hand Protection: Non permeable gloves (rubber, nitrile) recommended. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Blue powder Odour: Odourless Odour threshold: N/A pH: 11.5 (3.1% solution) Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): N/A Solubility(ies): Soluble in water ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None under recommended use conditions. Conditions to avoid Excess heat and moisture. Temperatures above 30 C and below 5 C. Incompatibility: Strong acids, strong oxidizing agents, strong reducing agents. Hazardous Decomposition Products: Carbon oxides, phosphorous oxides, sodium oxides. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes skin burns and eye damage. May cause irritation of the respiratory tract. Acute Toxicity Estimates: Oral � 2000 mg/kg; erm�al 2000 mg/kg; Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on the components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Sodium Carbonate (CAS# 497 8): (Pimephales promeals) 310 1220 mg/L, Exposure Time, 96 h, Test Type: Static (Lepomis macrochirus) 300 mg/L, Exposure Time: 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: Sodium Carbonate (CAS# 497 8): (Daphnia magna (water flea)): 265 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not Regulated UN Proper Shipping Name: Not Regulated Transport Hazard Class(es): Not Regulated Packing Group: Not Regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION B = Safety glasses + Gloves HMIS Protection Group B All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets ��PROJECT CLEAN SILVER PRE SOAK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Oven and Grill Cleaner AODA.pdf ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Oven & Grill Cleaner Product Code: Recommended Use: High alkaline oven & grill cleaner Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Label Elements: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging . P260 Do not breathe dusts or mists . P264 Wash hands and affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 + P317 IF IN EYES: Rinse cautiously with water for several minutes. Remove contac t lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hydroxide 1310 C6 12 Alkyl Alcohol Ethoxylate Phosphoric Acid , Sodium Salt 68610 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and lau nder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Phys ician. ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: ause serious chemical i njuries to upper gastrointestinal tract. Inhalation: y injure the pulmonary epitheliu m at various level s of the respiratory tract. Eyes and skin Corrosive to eyes and skin. Burn and destroy body tissues on contact. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Use extinguishing media suitable for surrounding fire. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Reacts violently with many organic chemicals, especially nitro carbons and chlorocarbons. May react with zinc, aluminum, tin and other active metals liberating flammable hydrogen gas. Dilution in water evolves large amounts of heat. Hazardous Decomposition Products: Oxides of carbon, phosphorus , sodium. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SE CTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear , colourless liquid. Odour: Mild odour. No added fragrance. Odour threshold: N/A pH: 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: 100 C approximate. Flash Point: �100 Evaporation Rate (Water=1): Flammability: Not flammable Upper/Lower flammability or explosive limits: None ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOC Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Incompatible with acid, metals and alloys, zinc, tin, aluminum, organic chemicals, nitrocarbons, halocarbons. Hazardous Decomposition Products: Oxides of carbon, nitrogen, sodium. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin contact, skin absorption, eye contact, inhalation, ingestion. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspira tion Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 824 UN Proper Shipping Name: SODIUM HYDROXIDE, SOLUTION Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: Litre Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme HMIS ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION High 2 = Moderate 1 = Slight 0 = Insignificant Health Flammability Reactivity Personal protection B = Safety lasses + Gloves HMIS Protection Group B All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified ��PROJECT CLEAN OVEN & GRILL CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Stainless Steel Shine AODA-Laptop10-PC.pdf ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim tainless Steel Shine roduct Code: 130 1024 Recommended Use: Non aerosol stainless steel cleaner and polish. Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION Category Symbol: Signal word: DANGER Hazard Statement: H31 Causes serious eye irritation. PRECAUTIONARY STATEMENTS Prevention: P280 Wear eye protection/ face protection. Responses: P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Fatty acids, coco, reaction products with diethylenetriamine and soya fatty acids, ethoxylated, chloromethane quaternized 207308 Alcohol Ethoxylate 68991 Hexylene Glycol 107 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove conta minated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Corrosive to eyes. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, silicon oxides, hydrochloric acid, volatile amines, nitrogen oxides. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recover ed material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: No Gloves required for normal use of product. Wear chemical resistant, impervious gloves if skin contact may occur. No Apron required for normal use of product. Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Chemical splash goggles. ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory Protection: Not required for normal use of product. Respirator should be selected based on the task being performed and the risks involved. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Milky white liquid. Odour: Mild to no odour, no added fragrance. Odour threshold: N/A pH: 4.0 5.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Incompatibility: Do not use with chlorates, nitrates, hypochlorites , oxidizing or alkaline materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, silicon oxides, hydrochloric acid, volatile amines, nitrogen oxides. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye irritation. Prolonged skin contact may cause mild skin irritation. Acute Toxicity Estimates: Oral ATE �2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SE CTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not available. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate ��MAXIM TAINLESS STEEL SHINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Laundry Plus AODA.pdf ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Laundry Plus Product Code: 1200638 Recommended Use: Liquid laundry Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITAITON Category EYE DAMAGE/ IRRITATION Category CARCINOGENICITY Category 2 SENSITIZATION SKIN Category 1 Label Elements: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 Causes serious eye damage H351 Suspected of causing cancer H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P270 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P405 Store locked up. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Coconut Diethanolamide 68603 Dodecyl Benzenesulfonic Acid, Sodium Salt 25155 Dodecyl Benzenesulfonic Acid, DEA Salt 26545 Alcohol Ethoxylate 68439 Diethanolamine 0.1 111 Perfume 0.1 Mixture Back to Top ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemical reaction that worsens the burn. Don 't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid sp raying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an emergency room. The person should keep the eye open as wide as possible . Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themse lves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin: Irritating to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Flammability: Not flammable Flash Point: Not flammable Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known Hazardous Decomposition Products: Carbon oxides, sodium oxides Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions ken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at t emperatures below 30 and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Synthetic apron. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Splash goggles. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Blue viscous liquid Odour: No added fragrance Odour threshold: N/A pH: 10.0 11.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents and strong acids. Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products should not be produced. Hazardous thermal decomposition products include but not limited to carbon oxides, and sodium oxides. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage. Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 0.21% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Alcohol Ethoxylate (CAS# 68439 3): (Non disclosed algae species) 100 mg/L, Exposure Time: 72 h, Test Type: N/A Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): (Non disclosed fish species) 10 mg/L, Exposure Time, 96 h, Test Type: N/A ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: Alcohol Ethoxylate (CAS# 68439 3): Readily biodegradable. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety glasses + Gloves HMIS Protection Group ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure ��MAXIM MAX LAUNDRY PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportatio n of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Laundry AODA.pdf ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Laundry Product Code: 1200638 Recommended Use: Liquid laundry Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: gulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITAITON Category EYE DAMAGE/ IRRITATION Category CARCINOGENICITY Category 2 SENSITIZATION SKIN Category 1 Label Elements: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 Causes serious eye damage H351 Suspected of causing cancer H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P270 Use only outdoors or in a well ventilated area. Responses: P318 IF P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P304 + P340 + P319 IF I NHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P405 Store locked up. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Coconut Diethanolamide 68603 Dodecyl Benzenesulfonic Acid, Sodium Salt 25155 Dodecyl Benzenesulfonic Acid, DEA Salt 26545 Alcohol Ethoxylate 68439 Diethanolamine 0.1 111 Perfume 0.1 Mixture Back to Top ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a ch emical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the inj ured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an emergency room. The person sh ould keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved , take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin: Irritating to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Flammability: Not flammable Flash Point: Not flammable Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known Hazardous Decomposition Products: Carbon oxides, sodium oxides Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions ken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at t emperatures below 30 and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Synthetic apron. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Splash goggles. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Blue viscous liquid Odour: No added fragrance Odour threshold: N/A pH: 10.0 11.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents and strong acids. Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products should not be produced. Hazardous thermal decomposition products include but not limited to carbon oxides, and sodium oxides. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage. Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 0.21% of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Alcohol Ethoxylate (CAS# 68439 3): (Non disclosed algae species) 100 mg/L, Exposure Time: 72 h, Test Type: N/A Toxicity to Fish Species: Alcohol Ethoxylate (CAS# 68439 3): (Non disclosed fish species) 10 mg/L, Exposure Time, 96 h, Test Type: N/A ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Aquatic Invertebrates: Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: Alcohol Ethoxylate (CAS# 68439 3): Readily biodegradable. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety glasses + Gloves HMIS Protection Group ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure ��MAXIM MAX LAUNDRY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportatio n of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Exult Hi-Foam Car Wash Soap AODA.pdf ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Exult Hi Foam Car Wash Soap Product Code: 400725 Recommended Use: Liquid car wash Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITAITON Category EYE DAMAGE/ IRRITATION Category CARCINOGENICITY Category 2 SENSITIZATION SKIN Category 1 Symbol: Signal word: ANGER Hazard Statement: H315 Causes skin irritation. H31 Causes serious eye damage H351 Suspected of causing cancer H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P270 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P405 Store locked up. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Dodecyl Benzenesulfonic Acid, Sodium Salt 25155 Dodecyl Benzenesulfonic Acid, DEA Salt 26545 Diethanolamine 0.1 111 Perfume 0.1 Mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Skin Contact Rinse skin. If irritation persists, obtain medical attenti on. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Eff ects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. May cause allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire/ Explosion Hazards: None known. Hazardous Decomposition Products: Carbon oxides, Sodium oxides, Su lphur oxides. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal p rotective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles o r safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pinkish red liquid. Odour: Cherry fragrance. Odour threshold: N/A pH: 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.03 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizers, strong reducing agents, acids, bases. Hazardous Decomposition Products: Carbon oxides, Sodium oxides, Su lphur oxides. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage, irritating to eyes. May cause respiratory track irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure ��MAXIM EXULT HI FOAM CAR WASH SOAP SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liabilit y for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Washroom Sense AODA-Laptop10-PC.pdf ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Washroom Sense Product Code: 1301300 Recommended Use: Ecologo certified safe acid wash room cleaner Restrictions on Use: For Industrial use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back o Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION Category 2A Symbol: Signal word: Warning Hazard Statement: H319 Causes serious eye irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash skin and affected area thoroughly after handling. P280 Wear eye protection/ face protection. Responses: P305 + P354 + P338 + P337 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists. Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back o Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Urea Methanesulfonate 207308 ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back o Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilu te product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the ma terial(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate danger. Inhalation: No immediate danger. Eyes and skin: No immediate danger. May cause s erious eye irritation. If irritation occurs or persists, get medical attention. Back o Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None k nown. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: At temperatures above 110 C results in an exothermic decomposition with release of CO gas. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides Back o Top ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back o Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back o Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being p erformed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Chemical spl ash goggles. Respirato ry Protection: Not required for normal use of product. Respirator should be selected based on the task being performed and the risks involved. Other Protective Equipment: Eye wash station. Back o Top SECTION 9: PHYSICAL AND CHEMICAL PROPERT IES Appearance: Clear, orange liquid Odour: Floral fragrance Odour threshold: N/A pH: Melting point/Freezing point: N/A ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERT IES Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back o Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Do not use with chlorates, nitrates, hypochlorites , oxidizing or alkaline materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides Back o Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Cause serious eye damage. May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral �2000 mg/kg 0% of the mixture consist of ingredients of unknown acute oral toxicity. Dermal � 2000 mg/kg 2.63% of the mixture consist of ingredients of unknown acute oral toxicity. ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back o Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo M program under UL2759. Back o Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back o Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back o Top ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back o Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM WASHROOM SENSE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportatio n of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back o Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will a ccept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Hand & Body (Cherry) AODA.pdf ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Hand & Body (Cherry) Product Code: 1300574 Recommended Use: Cherry scented hand soap Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITAITON – Category 2 EYE DAMAGE/ IRRITATION – Category 1 CARCINOGENICITY – Category 2 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: DANGER Hazard Statement: H315 Causes skin irritation. H31 8 Causes serious eye damage . H351 Suspected of causing cancer . H317 May cause an allergic skin reaction. Prevention: P203 Obtain, read and follow all safety instructions before use. P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplemental first aid information on this label) P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium (C14 16) Olefin Sulfonate 68439 Sulfuric Acid, Mono C10 Alkyl Esters, Sodium Salts 68585 Coconut Diethanolamide 68603 Diethanolamine 111 Cocamidopropyl betaine 61789 Perfume 0.1 Mixture SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of cont amination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazard ous Decomposition Products: Carbon oxides, nitrogen oxides, carbamates. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Pro vincial or Federal regulations. ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Eye wash, safety shower and fu ll protective clothing recommended in the immediate work area. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Opaque pink liquid. Odour: Cherry scent. Odour threshold: N/A pH: 6.0 8.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 2000 3000 cP @ 20 VOCs: N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizers, strong acids. flammable liquid, explosive, pyrophoric substances, ammonium nitrate, organic peroxides. Hazardous Decomposition Products: Carbon oxides, nitrogen oxides, carbamates. SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye damage. Prolonged skin contact may cause irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Coconut Diethanolamide (CAS#68603 9) is listed as Group 2B carcinogen by IARC. Diethanolamine (CAS# 111 2) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: 0.2 % of the ingredients are classified as an aspiration hazard. ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection HMIS Protection Group Not required ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations ��MAXIM HAND & BODY (CHERRY) SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Scale Away AODA.pdf ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Scale Away Product Code: 1401210 Recommended Use: Inhibited a cid scale and rust remover Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging . P260 Do not breathe dusts or mists . P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P30 + P361 + P35 + P363 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information) on this label. P305 + P35 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P406 Store in a corrosion resistant container with a resistant inner liner. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrochloric Acid 7647 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don't use a strong stream of water, if pos sible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could cause a chemical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that the injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or ey es. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an emergency room. The person should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no c hemical is still on them. Flush the eye ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decr ease light sensitivity Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. C all a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Cause serious chemical i njuries to upper gastrointestinal tract. Inhalation: May injure the pulmonary epithelium at various level s of the respiratory tract. Eyes and skin Corrosive to eyes and skin. Burn and destroy body tissues on contact. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Contact with reactive metals may produce flammable hydrogen gas. Hazardous Decomposition Products: When heated to decomposition, emits toxic hydrogen chloride fumes and will react with water or steam to produce heat and toxic and corrosive fumes. Thermal oxidative decomposition produces toxic chlorine fumes and explosive hydrogen gas Back to Top ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30oC and keep from freezing. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable gloves (rubber, nitrile) recommended. Rubber/PVC aprons when skin contact may occur. Rubber boots. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and mi sting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light amber liquid Odour: Pungent acid odo Odour threshold: N/A pH: 1.0 ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 C Evaporation Rate (Water=1): N/A Flammability: Not f lammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: ot flammable Decomposition temperature: N/A Viscosity Thin like water VOC N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions Possibility of hazardous reactions Avoid contact with acid/oxidizers. Conditions to avoid Temperatures above 30 C and below 5 C. Avoid Incompatibility: Very corrosive to metals, producing flammable hydrogen gas. Reacts violently with bases to produce heat. Reacts with reducing agents to produce heat and flammable hydrogen gas. Reacts with oxidizing agents to produce heat and toxic or corrosive chloride gases. Contact with explosives may cau se hydrogen sulphide gas. Hazardous Decomposition Products: Hydrogen chloride fume, toxic chlorine fumes and explosive hydrogen gas. k to Top ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 789 UN Proper Shipping Name: Hydrochloric Acid Transport Hazard Class(es): Packing Group: Environmental Hazards: Missing Special Precautions for User: Missing ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Additional Information: Limited Quantity Index: 1 Litre SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection C = Safety Glasses + Gloves + Apron HMIS Protection Group B + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer ��MAXIM SCALE AWAY SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Optibrite AODA.pdf ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Optibrite Product Code: 300 822 Recommended Use: Acrylic floor finish Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated cl othing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain med ical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Impo rtant Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components i ndicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��MAXIM OPTIBRITE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Powdered Oxygen Bleach AODA.pdf ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Powdered Oxygen Bleach Product Code: Recommended Use: Powdered oxygen bleach for laundry use Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards OXIDIZING SOLIDS – Category 2 Health Hazards: EYE DAMAGE/ IRRITATION – Category 1 Label Elements: Signal word: Danger Hazard Statement: H272 May intensify fire; oxidizer. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220 Keep away from clothing and other combustible materials. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection . Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing . P310 Immediately call a POISON CENTER/doctor/physician. P370 + P378 In case of fire: Use water spray or appropriate foam to extinguish. ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposa l plant. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Carbonate Peroxyhydrate 15630 Back to Top SECTION 4: FIRST AID MEASURES General Information Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medic al attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Eye Contact Immediately flush with running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induc e vomiting. If the victim is fully conscious, give clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remo ve all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause mild skin irritation. If irritation occurs or persists, get medical attention. Back to To ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Use water spray, dry chemical powder, appropriate foam. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Releases oxygen at high temperatures. Will release oxygen when heated, intensifying a fire. Fight fire from a safe distance and from protected location. Hazardous Decomposition Products: Sodium oxides, carbon oxides, oxygen. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment including respiratory protection. Avoid dust formation. Sweep up and shovel material into an appropriate dry waste closed container. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accord ance with all local, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for dust generated in confined areas. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety g lasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: White powder Odour: Odo rless Odour threshold: N/A pH: 11 (3.1% solution) Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): N/A Solubility(ies): 100 g/L Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: May intensify fire, oxidizer Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions Reacts with reducing agents, reacts with flammable substances. Conditions to avoid Excessive heat, moisture Incompatibility: Strong acids, reducing agents. Hazardous Decomposition Products: Sodium oxides, carbon oxides, oxygen Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin, eyes, inhalation. Symptoms: Causes serious eye damage. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Carbonate Peroxyhydrate (CAS# 15630 ): (Pimephales promeals) 70.7 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = S afety Glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��PROJECT CLEAN POWDE RED OXYGEN BLEACH SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical Internation al Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Soft AODA.pdf ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Soft Product Code: 1200670 Recommended Use: Laundry softener Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SKIN CORROSION/ IRRITATION Category 2A EYE DAMAGE/ IRRITATION Category 2A SPECIFIC Symbol: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P280 Wear eye protection and protective gloves. P261 Avoid breathing fume/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty water. P321 Specific treatment (see supplemental first aid information on this label). ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P33 + P317 + P362 + P364 If skin irritation occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Tallow Amido Imidazolinum Methosulphate 68122 Isopropanol Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or other proper respi ratory medical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be tr eated by a physician. Wash contaminated clothing before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin: Irritating to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Isopropanol is flammable. Flash Point: Not flammable. Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None. Hazardous Decomposition Products: Unidentified organic substances. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE away from incompatibles. Keep container closed when not in use. Keep out of re ach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Eye and Face Protection: Splash goggles. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Opaque, green liquid. Odour: Fresh scent. Odour threshold: N/A pH: 4.0 5.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Isopropanol is flammable. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 50cP @ 20 VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: N/A Conditions to avoid: Temperatures above 30 C and below 5 Incompatibility: Strong oxidizing agents and strong acids. Hazardous Decomposition Products: Unidentified organic substances. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye and skin irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety glasses + Gloves HMIS Protection Group B ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets ��MAXIM MAX SOFT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Gladiator AODA.pdf ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of 8 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Gladiator Product Code: 1300545 Recommended Use: Traffic lane, pre spray carpet cleaner Restrictions on Use: For Food plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufact urer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION – Category 2B SENSITIZATION – SKIN – Category 1 Symbol: Signal word: WARNING Hazard Statement: H320 Causes eye irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands and affected area thoroughly after handling. P261 Avoid breathing mist/ spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occur: Get medical help. P321 Specific treatment (see supplement first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 limonene 0.1 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Show this saf Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder bef ore reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Most Im portant Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. Eyes and skin Causes eye irritation. May cause an allergic skin reaction. ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EX POSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EX POSURE CONTROLS / PERSONAL PROTECTION Skin Protection: Not required under normal use condition. Butyl rubber, neoprene, latex, or nitrile gloves if user is allergic to this product. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: Not required under normal use condition. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light yellow colour liquid Odour: Citrus scent. Odour threshold: N/A pH: 7.5 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water. Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Incompatibility: Strong acids or alkali compounds and strong oxidizing agents may inactive biological cultures. Hazardous Decomposition Products: None known. Back to Top SECTION 11: TOXICOL OGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause an allergic skin reaction. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: 0.5 05 % of the component are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection Safety glasses. HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System ��MAXIM GLADIATOR SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Pa ge of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Non-Toxic Glass Cleaner AODA.pdf ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim GlassMax Product Code: 1300547 Recommended Use: Concentrated glass & surface cleaner Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/IRRITATION Category 2A Symbol: Signal word: Warning Hazard Statement: H319 Causes serious eye irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands or affected area thoroughly after handling. P280 Wear eye protection. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P31 If eye irritation persists Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alkoxylated Fatty Alcohol A and B TSRN #360416 HMIRA Registry # 9790, filing date 2016 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye C ontact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection f the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. Eyes and skin May cause serious eye irritation. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use dry chemical fire extinguishing agents containing ammonium compounds (such as some A:B:C agents), since explosive compound can be formed. Flammability: Not flammable. Flash Point: Not flammable. ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Fed eral regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the sk being performed and the risks involved. Eye and Face Protection: Safety glasses if eye contact may occur. Respirator y Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: in the immediate work area. ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Dark blue liquid. Odour: Mild musty odour (no added fragrance) Odour threshold: N/A pH: 7.0 7.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: Strong oxidizing agents. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides. ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Serious eye irritation. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Acute EC 100mg/L Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo M program under UL2759. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Back to Top ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection A = Safety glasses HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��PROJECT CLEAN NON TOXIC GLASS CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim NeutraPower AODA.pdf ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Neutra Power Product Code: 1300725 Recommended Use: Neutral pH floor cleaner with d limonene Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION Category 2 EYE DAMAGE/IRRITATION Category 1 SENSITIZATION SKIN Category 1 Label Elements: Signal word: Danger Hazard Statement: H315 Causes skin irritation. H318 Causes serious eye damage H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see supplemental first aid information on this label). ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P333 + P317 If skin irritation or rash occur: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68439 limonene 0.1 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and eas y to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to prot ect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. May cause serious allergic skin reaction. If irritation occurs or persists, get medical attention. ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on s kin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable chemically resistant gloves (rubber, nitrile). ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Eye and Face Protection: Normally not required. Use chemical goggles or safety glasses when eye contact may occur Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light green liquid. Odour: Citrus scen Odour threshold: N/A pH: 6.5 7.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Keep away from heat, sparks and flame. Avoid hot work and sources of ignition on or near empty containers. Incompatibility: Reacts violently with a mixture of iodine pentafluoride and tetrafluoroethylene, causing fire and explosion hazard. Reacts with oxidants. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and irritating to skin. May cause allergic skin reaction. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 1 % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. ��MAXIM NEUTRAPOWER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Oxy AODA.pdf ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Oxy Product Code: 1200650 Recommended Use: Powdered oxygen bleach for laundry use Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards OXIDIZING SOLIDS – Category 2 Health Hazards: EYE DAMAGE/ IRRITATION – Category 1 Label Elements: Signal word: Danger Hazard Statement: H272 May intensify fire; oxidizer. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220 Keep away from clothing and other combustible materials. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection . Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing . P310 Immediately call a POISON CENTER/doctor/physician. P370 + P378 In case of fire: Use water spray or appropriate foam to extinguish. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Carbonate Peroxyhydrate 15630 Back to Top SECTION 4: FIRST AID MEASURES General Information Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Eye Contact Immediately flush with running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present an d easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give clean water to drink to dilute product. Never give anything by mouth if victim is unc onscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselve s and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause mild skin irritation. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Use water spray, dry chemical powder, appropriate foam. ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Releases oxygen at high temperatures. Will release oxygen when heated, intensifying a fire. Fight fire from a safe distance and from protected location. Hazardous Decomposition Products: Sodium oxides, carbon oxides, oxygen. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment including respiratory protection. Avoid dust formation. Sweep up and shovel material into an appropriate dry waste closed container. Keep material away from sewers. Reuse if possibl e, otherwise dispose recovered material in accordance with all local, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures b elow C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for dust generated in confined areas. ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: White powder Odour: Odo rless Odour threshold: N/A pH: 11 (3.1% solution) Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): N/A Solubility(ies): 100 g/L Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: May intensify fire, oxidizer Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions Reacts with reducing agents, reacts with flammable substances. Conditions to avoid Excessive heat, moisture Incompatibility: Strong acids, reducing agents. Hazardous Decomposition Products: Sodium oxides, carbon oxides, oxygen Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin, eyes, inhalation. Symptoms: Causes serious eye damage. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Carbonate Peroxyhydrate (CAS# 15630 ): (Pimephales promeals) 70.7 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = S afety Glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM MAX OXY SAFET Y DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical Internation al Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Safe Acid Washroom Cleaner AODA.pdf ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Safe Acid Washroom Cleaner Product Code: Recommended Use: Ecologo certified safe acid wash room cleaner Restrictions on Use: For Industrial use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION Category 2A Symbol: Signal word: Warning Hazard Statement: H319 Causes serious eye irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash skin and affected area thoroughly after handling. P280 Wear eye protection/ face protection. Responses: P305 + P354 + P338 + P337 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists. Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Urea Methanesulfonate 207308 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate danger. Inhalation: No immediate danger. Eyes and skin: No immediate danger. May cause serious eye irritation. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unusual Fire / Explosion Hazards: At temperatures above 110 C results in an exothermic decomposition with release of CO gas. Hazardo us Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in acco rdance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Chemical splash goggles. Respirato ry Protection: Not required for normal use of product. Respirator should be selected based on the task being performed and the risks involved. Other Protective Equipment: Eye wash station. Back to Top ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, orange liquid Odour: Floral fragrance Odour threshold: N/A pH: Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Do not use with chlorates, nitrates, hypochlorites , oxidizing or alkaline materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Symptoms: Cause serious eye damage. May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral �2000 mg/kg 0% of the mixture consist of ingredients of unknown acute oral toxicity. Dermal � 2000 mg/kg 2.63% of the mixture consist of ingredients of unknown acute oral toxicity. Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no p otential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo program under UL2759 Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations ��PROJECT CLEAN SAFE ACID WASHROOM CLEANER SAFETY DATA SHEET ��PREPARED BY: LAST UPDAT Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Oven & Grill AODA.pdf ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Oven & Grill Product Code: 1100435 Recommended Use: High alkaline oven & grill cleaner Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Label Elements: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging . P260 Do not breathe dusts or mists . P264 Wash hands and affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 + P317 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hydroxide 1310 C6 12 Alkyl Alcohol Ethoxylate Phosphoric Acid , Sodium Salt 68610 SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aid er: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: ause serious chemical i njuries to upper gastrointestinal tract. Inhalation: y injure the pulmonary epitheliu m at various level s of the respiratory tract. Eyes and skin Corrosive to eyes and skin. Burn and destroy body tissues on contact. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Use extinguishing media suitable for surrounding fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Reacts violently with many organic chemicals, especially nitro carbons and chlorocarbons. May react with zinc, aluminum, tin and other active metals liberating flammable hydrogen gas. Dilution in water evolves large amount s of heat. Hazardous Decomposition Products: Oxides of carbon, phosphorus , sodium. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered materi al in accordance with all local, Provincial or Federal regulations. Back to Top ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety g lasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear , colourless liquid. Odour: Mild odour. No added fragrance. Odour threshold: N/A pH: 13.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: 100 C approximate. Flash Point: �100 Evaporation Rate (Water=1): Flammability: Not flammable Upper/Lower flammability or explosive limits: None ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOC Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Incompatible with acid, metals and alloys, zinc, tin, aluminum, organic chemicals, nitrocarbons, halocarbons. Hazardous Decomposition Products: Oxides of carbon, nitrogen, sodium. Back to Top SECTION 11: TOXICOLO GICAL INFORMATION Likely routes of exposure: Skin contact, skin absorption, eye contact, inhalation, ingestion. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLO GICAL INFORMATION Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 824 UN Proper Shipping Name: SODIUM HYDROXIDE, SOLUTION Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: Litre Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme HMIS ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION High 2 = Moderate 1 = Slight 0 = Insignificant Health Flammability Reactivity Personal protection B = Safety lasses + Gloves HMIS Protection Group B All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified ��MAXIM OVEN & GRILL SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Oxy-slam AODA.pdf ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Oxy slam Product Code: 130083 Recommended Use: Peroxide and d limonene based cleaner/ degreaser Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/ IRRITATION – Category 1 EYE DAMAGE/ IRRITATION – Category 1 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) – Category 3 SENSITIZATION – SKIN – Category 1 Symbol: Signal word: DANGER Hazard Statement: H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P241 Use explosion proof equipment. P242 Use non sparking tools. P243 Take action to prevent static discharges. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P280 Wear eye protection and protective gloves. P260 Do not breathe dusts or mists. P271 Use only outdoors or in a well ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. Responses: P370 + P378 In case of fire: Use water fog, alcohol foam or dry chemical to extinguish. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 + P362 + P364 If skin irritation or rash occurs: Get medical help. Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with wate r for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P312 Specific treatment (see supplement first aid information on this label). Storage: P403 + P235 + P233 Store in a well ventilated place. Keep cool. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alcohol Ethoxylate 68991 ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Hydrogen Peroxide 7722 C6 12 Alkyl Alcohol Ethoxylate Phosphoric Acid 68921 Limonene 5989 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medic al attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contac Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of th e First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: Corrosive to eyes and skin Skin turns white upon contact. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, dry chemical powder, carbon dioxide. Unsuitable Extinguishing Media: None known. ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Flammability: Flammable liquid and vapours. Flash Point: (PMCC) Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Do not use CO extinguisher on this material. Unusual Fire / Explosion Hazards: Flammable. C an cause spontaneous combustion of flammable materials and continued support of the combustion because it liberates oxygen as it decomposes. Drying of concentrated product on clothing or other combustible material may cause fire. Hazardous Dec omposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C and keep from freezing Do not store in metal or galvanized containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and t he risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Safety glasses or splash goggles. Respiratory Protection: In case of insufficient ventilation, wear suitable res piratory equipment. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liquid. Odour: Citrus scent. Odour threshold: N/A pH: 5.5 6.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: (PMCC) Evaporation Rate (Water=1): N/A Flammability: Flammable liquid and vapours. Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 and below 5 C. Keep away from heat, sparks and flame. Avoid hot work and sources of ignition or on near empty containers. Incompatibility: Oxidizing agents, iron, copper, brass, bronze, chromium, zinc, lead, silver, manganese. Contact with combustible material may result in spontaneous combustion Hazardous Decomposition Products: Carbon dioxide, carbon monoxide. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause serious irritation to eyes and skin. May cause irritation to respiratory track limonene is a known skin sensitizer. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: This product contains roughly 0. % of D Limonene (CAS# 5989 5) which is a known skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SE CTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Limonene (CAS# 5989 5): (Desmodesmus subspicatus (green algae)) 150 mg/L, Exposure Time: 72 h, Test Type: Static Toxicity to Fish Species: Limonene (CAS# 5989 5): Pimephales promeals) 0.702 mg/L, Exposure Time, 96 h, Test Type: Flow Through ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SE CTION 12: ECOLOGICAL INFORMATION Hydrogen Peroxide (CAS# 7722 1): (Pimephales promeals) 16.4 mg/L, Exposure Time, 96 h, Test Type: N/A (Lepomis macrochirus) 56 mg/L, Exposure Time, 96 h, Test Type: Static (Oncorhynchus mykiss) 10.0 32.0 mg/L, Exposure Time, 96 h, Test Type: Static Alcohol Ethoxylate (CAS# 68991 0): (Fish) 70.1 mg/L, Exposure Time, 48h, Test Type: Static Toxicity to Aquatic Invertebrates: Limonene (CAS# 5989 5): (Daphnia magna (water flea)): 0.36 mg/L, Exposure Time: 48 h, Test Type: Static Hydrogen Peroxide (CAS# 7722 1): (Daphnia magna (water flea)): 32 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68991 0): (Daphnia magna (water flea)): 5.3 mg/L, Exposure Time: 48h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: UN1993 UN Proper Shipping Name: FLAMMABLE LIQUID, N.O.S . (d limonene) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User Not available. Additional Information: Limited Quantity Index: 5L Back to Top ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + Gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available ��MAXIM OXY SLAM SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Rep eated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liabilit y for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Gentle Scrub Cream Cleanser AODA.pdf ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Gentle Scrub Cream Cleanser Product Code: 1301017 Recommended Use: Hard surface polisher, cleaner. Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION Category EYE DAMAGE/IRRITATION Category Label Elements: Signal word: WARNING Hazard Statement: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P332 + P313 If skin irritation occurs: Get medical advice/attention. ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P337 + P313 If eye irritation persists: Get medical advice/attention. P321 Specific treatment (see supplemental first aid information on this label). P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Calcium Carbonate 471 Sodium Dodecylbenzenesulfonate 25155 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Eff ects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Irritating to eyes and skin. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Product not flammable. Use extinguishing media suitable for surrounding fires. Unsuitable Extinguising Media None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including NIOSH/MSHA approved breathing apparatus. Use water spray to cool all nearby fire exposed surfaces Unusual Fire / Explosion Hazards: None known Hazardous Decomposition Products: Oxides of carbon Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wit h all local, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE Store at temperatures below 30 and ab ove 5 containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selec ted based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: None required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pale blue, opaque gel. Odour: Lime fragrance. Odour threshold: N/A pH: 8.0 9.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapor pressure: N/A Vapor density: N/A Relative density/Specific gravity (Water = 1): @ 20 ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 15000 20000 cP VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 Incompatibility: Oxidizing agents. Hazardous Decomposition Products: Oxides of carbon. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin contact, skin absorption, eye contact, inhalation, ingestion Symptoms: SKIN CONTACT: Causes skin irritation. EYE CONTACT: Causes serious eye irritation. INHALATION: May cause respiratory irritation. INGESTION: May be harmful if swallowed. May cause gastrointestinal irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: This product contains roughly 0.9% skin sensitizing component. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 12: ECO LOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTH ER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water ��MAXIM GENTLE SCRUB CREAM CLEANSER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTH ER INFORMATION SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Barnacle Milk AODA.pdf ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Barnacle Milk Product Code: 1400095 Recommended Use: Concrete admixture Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: NONE Health Hazards: SENSITIZATION SKIN Category 1 Symbol: Signal word: WARNING Hazard Statement: H317 May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS Prevention: P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear eye protection/ face protection. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P317 If skin irritation or rash occurs: Get medical help. P321 Specific treatment (see supplemental first aid information on this label). P362 + P364 Take off contaminated clothing and wash it before reuse. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Ammonium Hydroxide 0.1 1336 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with soap and water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Eff ects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: Prolonged eye or skin contact may cause irritation. May cause an allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: lcohol foam, dry chemical , alcohol resistant foam. Unsuitable Extinguishing Media: Water spray. Flammability: Not flammable. Flash Point: Not flammable. ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None. Hazardous Decomposition Products: Oxides of carbon and other toxic/ irritating organic fumes. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Othe rwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 C. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves if user is allergic to this product. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Not required for normal use of product. However, use chemical gog Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Milky white liquid with blue tints. Odour: Mild acrylic odor. Odour threshold: N/A pH: 9.5 10.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: None to 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.06 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: N/A Conditions to avoid: Temperatures above 30 and below 5 C. Incompatibility: Strong acids and bases, strong oxidizing agents. ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Hazardous Decomposition Products: Oxides of carbon and other toxic/ irritating organic fumes. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Prolonged contact may cause mild skin or mild eye irritation. Inhalation may cause slight discomfort. Acute Toxicity Estimates: Ingestion �2000 mg/kg Dermal �2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Less than 0.55% of the components are classified as skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection Gloves HMIS Protection Group A All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations ��MAXIM BARNACLE MILK SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Semi-permenant Floor Sealer AODA.pdf ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Semi Permanent Floor Sealer Product Code: Recommended Use: Semi permanent floor sealer Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self otection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance wi th all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EX POSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components i ndicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��PROJECT CLEAN SEMI PERMANENT FLOOR SEALER SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Tile-O AODA.pdf ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Tile Product Code: 130 1150 Recommended Use: Acid tile and grout cleaner Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P271 Use only outdoors or in a well ventilated area. ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Hydrochloric Acid 7647 Oxalic Acid 144 Amines, Tallow Alkyl, Ethoxylate 61791 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 20 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder befo re reuse. Eye Contact: Immediately flush with running water for at least 15 30 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediatel y. ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Eff ects, Acute and Delayed: Ingestion: Burn mouth and throat. May cause serious gastrointestinal irritation or ulceration. Inhalation: Severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Use extinguishing media suitable for surrounding fires. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: flammable/explosive hydrogen gas. Hazardous Decomposition Products: When heated to decomposition, emits toxic hydrogen chloride fumes and will react with water or steam to produce heat, toxic and corrosive fumes. Thermal oxidative decomposition produces toxic chlorine fumes and explosive hydrogen gas. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Steps to be Taken in Case Material is Released or Spilled: Wear protective equipment including respiratory protection. Soak up spills with absorbents, the dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all loc al, provincial or federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions to be Taken in Handling and Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing acid vapor/mist. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children. Store at temperatures below 30 C (86 F). Do not store in metal containers. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation or local exhaust ventilation for spray/mist generated in confined areas. Skin Protection: Butyl rubber, neoprene, latex or nitrile gloves. Personal protective equipment for the body should be selected based on the task eing performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles, safety glasses or face shield. Respiratory Protection: Use NIOSH/MSHA approved respirator (for hydrochloric acid) when working with concentrated liquid. Other Protective Equipment: Back to Top SEC TION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Bluish green gel. Odour: Almond fragrance. Odour threshold: N/A pH: 1.0 Melting point/Freezing point: N/A ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SEC TION 9: PHYSICAL AND CHEMICAL PROPERTIES Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 3 g/ml Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 2000 3000 cP VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: Very corrosive to metals, releasing flammable hydrogen gas. Reacts violently with bases releasing heat. Reacts with reducing agents releasing heat and flammable hydrogen gas. Reacts with oxidizing agents releasing heat and toxic, corrosive chlorine gas. Re acts with cyanides releasing toxic cyanide gas. Reacts with sulphides releasing toxic hydrogen sulphide gas. Contact with explosives may cause detonation. Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions: Contact with metals, bases, oxidizing, reducing agents. Conditions to avoid: Temperatures above 30 C and below 5 C. Avoid contact with incompatible materials. Incompatibility: Bases, oxidizing agents, reducing agents, reactive metals , ammonia. Hazardous Decomposition Products: Carbon oxides, hydrogen chloride gas, chlorine gas, hydrogen gas. Back to Top ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin and eye contact, inhalation, ingestion. Symptoms: Acute Irritation and corrosion to eyes , skin and respiratory system. Danger of severe damage to eyes and lungs . Ingestion may cause damage to the gastrointestinal system. Acute Toxicity Estimates: (oral)� 2000 mg/kg (dermal )� 2000 mg/kg ATE mix (inhalation, mist) 0.05 0.5 mg/L Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. The Department of Health and Human Services (DHHS), the International Agency for Research on Cancer (IARC), and the EPA have not classified hydrogen chloride as to its carcinogenicity. IARC considers hydrochloric acid to be not classifiable as to its carcinogenicity to humans. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae: Hydrogen Chloride (CAS# 7647 0): (Desmodesmus subspicatus (green algae)) 0.0492 mg/L, Exposure Time: 72 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (algae) 100 mg/L, Exposure Time: 72 h, Test Type: N/A Toxicity to Fish Species: Hydrogen Chloride (CAS# 7647 0): (Cyprinus carpio (Common Carp)) 4.92 mg/L, Exposure Time, 96 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (fish) 10 mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Hydrogen Chloride (CAS# 7647 0): (Shrimp): 100 300 mg/L, Exposure Time: 48 h, Test Type: N/A Alcohol Ethoxylate (CAS# 68439 3): (Daphnia magna (water flea)): 10 mg/L, Exposure Time: 48 h, Test Type: N/A Persistence and degradability: N/A ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1789 UN Proper Shipping Name: HYDROCHLORIC ACID Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 1L Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION 4 = Extreme 3 = High 2 = Moderate 1 = Slight 0 = Insignificant HMIS Health Flammability Reactivity Personal protection Safety Glasses Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM TILE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Quat-Shot AODA.pdf ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Quat Shot Product Code: 1300900 Recommended Use: Ready Use (RTU) disinfectant cleaner. Canada Drug Identification Number (DIN) # 02243546 Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer: Project Clean Inc. 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 800 663 9925 Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/IRRITATION Category 2 Environmental Hazards: HAZARDOUS TO THE AQUATIC ENVIRONMENT, ACUTE HAZARD Category 2 HAZARDOUS TO THE AQUATIC ENVIRONMENT, LONG TERM HAZARD Category 3 Symbol: NONE Signal word: WARNING Hazard Statement: Causes eye irritation. H401 Toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. PRECAUTIONARY STATEMENTS Prevention: P264 Wash hands or affected area thoroughly after handling. P273 Avoid release to the environment. Responses: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P31 If eye irritation persists Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. For Canada: This product is exempt from federal WHMIS requirements for supplier labels and SDSs (Food and Drugs Act) . However, provincial WHMIS legislation still applies. ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl Ammonium Chloride 0.105 85409 Alkyl Dimethyl Benzyl Ammonium Chloride (C12 18) 0.105 68391 SECTION 4: FIRST AID MEASURES Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Inhalation: Move to fresh air. Call a physician if symptoms develop or persists. Skin Contact: Wash off with soap and water. Get medical attention if irritation develops and persists. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion: Most important symptoms/effects, acute and delayed Exposed individuals may experience eye tearing, redness, and discomfort. Indication of immediate medical attention and special treatment needed If the product is ingested, probable muco sal damage may contraindicate the use of gastric lavage. Treat the affected person appropriately. General Information: Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. If irritation occurs or persists, get medical attention. SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides. SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulatio ns. SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 C (86 F) and keep from freezing. SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Gloves: Butyl rubber, neoprene, latex or nitrile gloves Masks/Goggles: Safety glasses if eye contact may occur. Respirator: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Apron: Not required under normal use condition. Boots: Not required under normal use condition. Other Protective Equipment: Eye wash station. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear green liquid. Odour: Baby powder fragrance. ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odour threshold: N/A pH: 11.7 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 15 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs%: N/A SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). Incompatibility: Strong acids, alkalis and oxidizing agents. Hazardous Decomposition Produ cts: Carbon dioxide, carbon monoxide, nitrogen oxides. SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Serious eye irritation. Acute Toxicity Estimates: O�ral 2000 mg/kg Dermal � 2000 mg/kg ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: This product contains 0.0427% Trisodium Nitrilotriacetate (CAS# 5064 which is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Reactivity Personal protection Safety glasses + Gloves HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations ��MAXIM QUAT SHOT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION VOCs Volatile Organic Compounds WHMIS Workplace Hazardous Materials Information System It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safet y Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Knock It Off! AODA.pdf ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Knock It Off! Product Code: 1300680 Recommended Use: Ecologo certified safe acid descaler Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Category 1 Health Hazards: EYE DAMAGE/ IRRITATION Category 1 Symbol: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P280 Wear eye protection/ face protection. Responses: P390 Absorb spillage to prevent material damage. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. * This material is corrosive to aluminum only. Non corrosive to skin and mild steel. ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Urea Methanesulfonate 207308 Urea Monohydrochloride 506 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean wat er to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No foreseeable hazard. Inhalation: No foreseeable hazard. Eyes and skin Corrosive to eyes. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: At temperatures above 60 C/ 140 F, acid action on most metals may release hydrogen, a highly flammable and explosive gas. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides, hydrochloric acid. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below C (86 F) and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colourless liquid Odour: No added fragrance Odour threshold: N/A pH: Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C (86 F) and below 5 (41 F). ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Incompatibility: Do not use with chlorates, nitrates, hypochlorites or alkaline materials. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides, hydrochloric acid. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Cause serious eye damage. Prolonged contact may cause mild skin irritation. Acute Toxicity Estimates: Oral = 4138 mg/kg 0% of the mixture consist of ingredients of unknown acute oral toxicity. Dermal � 2000 mg/kg 5.5% of the mixture consist of ingredients of unknown acute oral toxicity. Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no p otential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacter ia) as required by the Ecologo program under UL2759. Back to Top ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection = Safety glasses + gloves HMIS Protection Group All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will a ccept no liability for damages or loss incurred from the improper handling and use of this product. ��MAXIM KNOCK IT OFF! SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Unscented Biodegradable Lotion Soap AODA.pdf ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Unscented Biodegradable Lotion Soap Product Code: Recommended Use: Ecologo certified lotion hand soap Restrictions on Use: For Food plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: EYE DAMAGE/ IRRITATION Category 2A Symbol: Signal word: WARNING Hazard Statement: H319 Causes serious eye irritation PRECAUTIONARY STATEMENTS Prevention: P26 4 Wash and rinse skin thoroughly after handling. P280 Wear eye protection when eye contact may occur. Responses: P305 + P351 + P338 IF IN EYES: Rinse cau tiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P317 If eye irritation persists: Get medical help. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Sulfuric Acid, Mono C10 Alkyl Esters, Sodium Salts 8585 Sodium (C14 16) Olefin Sulfonate 68439 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: No immediate foreseeable danger. Inhalation: No immediate foreseeable danger. Eyes and skin May cause serious eye irritation. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Not available. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES cool all nearby fire exposed surfaces. as an extinguisher, as this will spread the fire. Unusual Fire / Explosion Hazards: Non e known. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, sulfur dioxide and oxides of sulfur. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Othe rwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Not required. Eye and Face Protection: Not required. Respiratory Protection: Not required. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: White pearly cream ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odour: No added fragrance. Odour threshold: N/A pH: 6.0 8.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Dispersible in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity 3000 4000 cP @ 20 VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong acids or alkali compounds and strong oxidizing agents may inactive biological cultures. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, s ulfur dioxide and oxides of sulfur. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Causes serious eye irritation. ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: This product does not exhibit the properties of ignitability, corrosivity, reactivity or environmentally persistent toxicity. This product does not adversely inhibit a diverse aquatic range of organisms (animal, plant, bacteria) as required by the Ecologo M program under UL2784. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection HMIS Protection Group Not required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4 Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal dose, 50% MSHA Mine Safety and Health Administration ��PROJECT CLEAN UNSCENTED BIODEGRADABLE LOTION SOAP SAFETY DATA SHEET ��PREPARED BY: AST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim HE Max Detergent AODA.pdf ��MAXIM ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Product Code: 1200455 Recommended Use: Liquid laundry detergent for HE laundry machines Restrictions on Use: For Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: SKIN CORROSION/IRRITATION – Category 2 EYE DAMAGE/IRRITATION – Category 1 SENSITIZATION – SKIN – Category 1 SPEC Label Elements: Signal word: Danger Hazard Statement: H315 Causes skin irritation. H318 Causes serious eye damage H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P264 Wash and rinse skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION Use only outdoors or in a well ventilated area. Responses: P302 + P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see supplemental first aid information on this label). P333 + P317 If skin irritation or rash occur: Get medical help. P362 + P364 Take off contaminated clothing and wash it before reuse. P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. P304 + P340 + P319 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical help if you feel unwell. Storage: P405 Store locked up. P403 + P233 Store in a well ventilated place. Keep container tightly closed. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Dodecylbenzenesulfonate 25155 Enzyme blend mixture Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Rinse skin. If irritation persists, obtain medical attention. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and eas y to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to prot ect themselves and prevent spread of contamination. ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: May cause respiratory irritation. Eyes and skin Corrosive to eyes. Repeated or prolonged skin contact may cause defatting and drying of skin which may result in skin irritation and dermatitis. May cause serious allergic skin reaction. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: None known. Hazardous Decomposition Products: The smoke may contain unidentified toxic and/or irritating compounds. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on s kin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Non permeable chemically resistant gloves (rubber, nitrile). Eye and Face Protection: Normally not required. Use chemical goggles or safety glasses when eye contact may occur Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Pale yellow, slightly viscous liquid. Odour: Fresh fragrance. Odour threshold: N/A pH: 7.5 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES VOCs%: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Avoid strong oxidizers, strong acids, strong bases. Incompatibility: Strong oxidizers, strong reducing agents, acids, bases. Hazardous Decomposition Products: Oxides of carbon. Oxides of sodium. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and irritating to skin. May cause allergic skin reaction. May cause respiratory irritation. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: 1 % of the ingredients are classified as a skin sensitizer. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated UN Proper Shipping Name: Not regulated Transport Hazard Class(es): Not regulated Packing Group: Not regulated Environmental Hazards: Not required. Special Precautions for User: Not required. Additional Information: Not required. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses + Gloves HMIS Protection Group All components of this product are listed on DSL/NDSL. All pertinent hazard information has been provided in this SDS, as per the requirements of the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM PREPARED BY: LAST UPDATE: Regulatory Divi sion Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Hold Out AODA.pdf ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Hold Out Product Code: 300600 Recommended Use: Semi permanent floor sealer Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards NONE Health Hazards: Non hazardous Symbol: No pictogram Signal word: Non hazardous Hazard Statement: Non hazardous PRECAUTIONARY STATEMENTS Prevention: Not regulated. Responses: Not regulated. Storage: Not regulated. Store in a cool, dry place. Keep container tightly closed. Keep out of reach of children. Disposal: Not regulated. Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number No hazardous material above reportable limit Back to Top ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fre sh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of cont amination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: None reasonably foreseeable. Inhalation: None reasonably foreseeable. Eyes and skin: None reasonably foreseeable. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Water fog, alcohol foam , or dry chemical. Unsuitable Extinguishing Media: None known. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Exposure to combustible products may be a hazard to health. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below 30 and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Not required under normal use condition. Other Skin Protection: Not required under normal use condition. Eye and Face Protection: Not required under normal use condition. Respirator y Protection: Not required under normal use condition. Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: white liquid Odour: No added fragrance Odour threshold: N/A pH: 8.0 8.5 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flash Point: 100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): 1.0 @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Slightly viscous. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: None known. Hazardous Decomposition Products: Carbon oxides, aldehydes and ket ones. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: May cause mild skin irritation for prolonged contact. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. spiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Non toxic on an acute basis. Toxicity to Fish Species: Non toxic on an acute basis. Toxicity to Aquatic Invertebrates: Non toxic on an acute basis. Persistence and degradability: Not availab le. Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: Not regulated. UN Proper Shipping Name: Not regulated. Transport Hazard Class(es): Not regulated. Packing Group: Not regulated. Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight HMIS Health Flammability ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION Insignificant Reactivity Personal protection HMIS Protection Group Not Required All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup ��MAXIM HOLD OUT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Combat AODA.pdf ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Combat Product Code: 1100190 Recommended Use: Low temp and high temp dish machine detergent for hard water use Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 CARCINOGENICITY Category 2 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H351 Suspected of causing cancer. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection P201 Obtain special instructions before use. ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P202 Do not handle until all safety precautions have been read and understood. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P363 Wash contaminated clothing before reuse. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 IF IN EYES: Rinse cauti ously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Storage: P406 Store in a corrosion resistant container with a resistant inner liner. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Trisodium nitrilotriacetate 18662 Sodium Hydroxide 1310 * Trisodium nitrilotriacetate’s monohydrate CAS number is 18662 8; In most world areas it is regulated as CAS 5064 3, the anhydrous form. Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Oxygen or artificial respiration if needed. Do not use mouth ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or o ther proper respiratory medical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious , is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and pr event spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin urns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable Flash Point: Not flammable Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. This material is harmful to aquatic life. Fire water contaminated with this material must be contained and prevent ed from being discharged to any waterway, sewer or drain. ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES Unusual Fire / Explosion Hazards: Hydrogen gas may be released upon contact with certain metals. Hazardous Decomposition Products: Oxides of carbon, oxides of nitrogen, metal oxide/oxides, hydroge n cyanide, ammonia. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temperatures below 30 C and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear red liquid Odour: No added fragrance Odour threshold: N/A pH: � 13 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents and acids. ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Hazardous Decomposition Products: Oxides of carbon, oxides of nitrogen, metal oxide/oxides, hydrogen cyanide, ammonia. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Nitrilotriacetic Acid (NTA) and its salts (CAS# 130 9) (evaluated as a group) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Trisodium Nitrilotriacetate (CAS# 5064 3): (Desmodesmus subspicatus) 298 mg/L, Exposure Time, 72 h, Test Type: N/A Toxicity to Fish Species: Sodium Hydroxide (CAS# 1310 2): (Oncorhynchus mykiss) 45.4 mg/L, Exposure Time, 96 h, Test Type: Static Trisodium Nitrilotriacetate (CAS# 5064 3): (Lepomis macrochirus) 298 mg/L, Exposure Time, 96 h, Test Type: N/A (Pimephales promelas) 103 mg/L, Ex posure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: Trisodium Nitrilotriacetate (CAS# 5064 3): (Gammarus pseudolimnaeus) 80 mg/L, Exposure Time, 96 h, Test Type: N/A 400 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: CAUSTIC ALKALI LIQUID, N.O.S., (Sodium Hydroxide) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Not available. Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMA TION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH he National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top ��MAXIM COMBAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division age of Project Clean Inc. (formerly Maxim Chemical International Inc.) It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Grill E Great AODA.pdf ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Grill E Great Product Code: 1100 280 Recommended Use: High alkaline oven and grill cleaner Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: Canada : Canutec 6666 U.S.A. : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Health Hazards: SKIN CORROSION/IRRITATION Category 1 EYE DAMAGE/IRRITATION Category 1 CARCINOGENICITY Category 2 Label Elements: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H351 Suspected of causing cancer. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P363 Wash contaminated clothing before reuse. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see supplemental first aid information on this label). P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue insing Storage: P406 Store in a corrosion resistant container with a resistant inner liner. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Potassium Hydroxide 1310 Trisodium nitrilotriacetate 0.1 1.5 18662 Trisodium nitrilotriacetate’s monohydrate CAS number is 18662 8; In most world areas it is regulated as CAS 5064 3, the anhydrous form. Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Inhalation Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical atten tion. Oxygen or artificial respiration if needed. Do not use mouth mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one way valve or other proper respiratory medical device. Call a POISON CENTER or doctor/physician if feeling unwell. Skin Contact Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash co ntaminated clothing before reuse. Eye Contact Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain me dical attention immediately Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respirato ry tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam, or dry chemical. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. Flammability: Not flammable Flash Point: Not flammable Special Firefighting Procedures: Directing a solid stream of water into a hot burning liquid can cause frothing and spread the fire. Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. This mate rial is harmful to aquatic life. Fire water contaminated with this material must be ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 5: FIRE FIGHTING MEASURES contained and prevented from being discharged to any waterway, sewer or drain. Unusual Fire / Explosion Hazards: Hydrogen gas may be released upon contact with certain metals. Hazardous Decomposition Products: Oxides of carbon, oxides of nitrogen, metal oxide/oxides, hydrogen cyanide, ammonia. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Sweep up and shovel material into an appropriate waste container. Flush area with water if appropriate. K eep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, rovincial or ederal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Keep out of reach of children. Store at temper atures below 30 C and above 5 Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general ventilation. Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for th e body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: hemical goggles or safety glasses. Respiratory Protection: Good general ventilation or local exhaust ventilation for spraying and misting in confined areas. ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Protective Equipment: Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear purple liquid Odour: No added fragrance Odour threshold: N/A pH: � 13 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions N/A Conditions to avoid Temperatures above 30 C and below 5 C. Incompatibility: Strong oxidizing agents and acids. Hazardous Decomposition Products: Oxides of carbon, oxides of nitrogen, metal oxide/oxides, hydrogen cyanide, ammonia. ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: SKIN CONTACT: May cause severe burns to skin. EYE CONTACT: May cause burns & serve eye damage. INHALATION: Mists may be irritant & cause burns to the respiratory tract. INGESTION: May cause severe burns to the digestive system. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Carcinogenicity: Nitrilotriacetic Acid (NTA) and its salts (CAS# 130 9) (evaluated as a group) is listed as Group 2B carcinogen by IARC. Group 2B Possibly carcinogenic to humans. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Trisodium Nitrilotriacetate (CAS# 5064 3): (Desmodesmus subspicatus) 298 mg/L, Exposure Time, 72 h, Test Type: N/A Toxicity to Fish Species: Trisodium Nitrilotriacetate (CAS# 5064 3): (Lepomis macrochirus) 298 mg/L, Exposure Time, 96 h, Test Type: N/A (Pimephales promelas) 103 mg/L, Exposure Time, 96 h, Test Type: N/A Toxicity to Aquatic Invertebrates: isodium Nitrilotriacetate (CAS# 5064 3): (Gammarus pseudolimnaeus) 80 mg/L, Exposure Time, 96 h, Test Type: N/A 400 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 814 UN Proper Shipping Name: POTASSIUM HYDROXIDE, SOLUTION ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 14: TRANSPORT INFORMATION Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index = 5L Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection B = Safety Glasses Gloves HMIS Protection Group B All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification Sy stem Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List ��MAXIM GRILL E GREAT SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Divisio Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer Lethal concentration, 50% MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ To xicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Max Conditioner Plus AODA.pdf ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of 9 Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Max Conditioner Plus Product Code: 1200601 Recommended Use: Concentrated liquid laundry sour Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards: CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists. P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Phosphoric Acid 7664 2 Hydroxyethanediphosphonic Acid 2809 Citric Acid Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation: Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Skin Contact: Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove conta minated clothing and launder before reuse. Eye Contact: Immediately flush with warm running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention immediately. Ingestion: Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Sympt oms/ Effects, Acute and Delayed: Ingestion: May burn mouth and throat. May cause gastrointestinal irritation or ulceration. Inhalation: Low toxicity. Excessive exposure may cause severe irritation to the upper respiratory tract. Eyes and skin: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Brief contact may cause skin burns. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Extinguishing Media Water fog, alcohol foam, or dry chemical. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Contact with reactive metals may produce flammable hydrogen gas. Hazardous Decomposition Products: Oxides of phosphorus. Back to Top SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away from sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Store in a cool, dry place away from incompatibles. Keep container closed ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 7: HANDLING AND STORAGE when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures be low 30 C and keep from freezing Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A Appropriate Engineering Controls: Good general ventilation. INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Gloves: Chemical resistant, impervious gloves Masks/Goggles: Chemical splash goggles. Respirator: Not required for normal use of product. Respirator should be selected based on the task being performed and the risks involved. Apron: Not required for normal use of product. Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Boots: Appropriate footwear should be selected based on the task being performed and the risks involved. Other Protective Equipment: Eye wash station. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, red liquid. Odour: Acidic odo r. No added fragrance. Odour threshold: N/A pH: 1.0 Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None. Vapo r pressure: N/A Vapo r density: N/A ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Relative density/Specific gravity (Water = 1): 1.23 @ 20 Solubility(ies): Soluble in water Partition coefficient: octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity Thin like water. VOCs: N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions. Possibility of hazardous reactions None known. Conditions to avoid Temperatures above 30 C and below 5 C. Avoid Incompatibility: Corrosive to metals, producing flammable hydrogen gas. Not compatible with fluorine, strong oxidizing/reducing agents, bases, metals, sulfur trioxide, phosphorus pentoxide Hazardous Decomposition Products: Oxides of phosphorus. Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE� 2000 mg/kg Inhalation ATE: N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: Not listed by NTP, IARC, OSHA, ACGIH. ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Back to Top SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae N/A Toxicity to Fish Species: N/A Toxicity to Aquatic Invertebrates: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1805 UN Proper Shipping Name: PHOSPHORIC ACID, LIQUID Transport Hazard Class(es): Packing Group: Environmental Hazards: Not available. Special Precautions for User: Not available. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: REGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: REGULATORY INFORMATION = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materials Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit ��MAXIM MAX CONDITIONER PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION PNOC Particulates not otherwise classified PMMCC Pensky Martens Closed Cup Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) will accept no liability for damages or loss incurred fro m the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
PCCo Dishmachine Chlorine AODA.pdf ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Project Clean Dish Machine Chlorine Product Code: Recommended Use: 12% Bleach solution for low temperature dish machine sanitizing Restrictions on Use: For Food Plant, Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS – Category 1 Health Hazards: SKIN CORROSION/IRRITATION – Category 1 EYE DAMAGE/IRRITATION – Category 1 Symbol: Signal word: Danger Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dusts or mists . P264 Wash hands or affected area thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: 390 Absorb spillage to prevent material damage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P302 + P361 + P354 IF ON SKIN: Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. P363 Wash contaminated clothing before reuse. P304 + P340 + P316 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321 Specific treatment (see supplemental first aid information on this label). P305 + P354 + P338 + P317 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help. Storage: P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Hypochlorite 7681 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Can release corrosive chlorine gas. Immediately remove the affected victim to fresh air. If symptoms persist, obtain medical attention. Symptoms of pulmonary edema can be delayed up to 48 hours of exposure. Skin Contact Flood area with cool water for at least 20 minutes or until help arrives. Make sure water doesn't flow onto another part of the person's body or onto you. Don 't use a strong stream of water, if possible. As you flush the burn (not before), remove jewelry or articles of clothing with chemical on them, unless they're stuck to the person's body. Don't try to neutralize the burn with acid or alkali. This could caus e a chemical reaction that worsens the burn. Don't put antibiotic ointment on the burn. Eye Contact Have the person immediately rinse the eye or eyes under a faucet, in a gentle shower, or with a clean container of water. Keep the person’s face so that t he injured eye is down and to the side. Avoid spraying a high pressure water stream into the eye or eyes. Flush with lukewarm water for 15 to 30 minutes. For severe burns, continue flushing until you see a doctor or you arrive in an ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES emergency room. The per son should keep the eye open as wide as possible. Wash the person's hands thoroughly to make sure no chemical is still on them. Flush the eye to remove contact lenses. If they do not come out, try to gently remove them AFTER flushing. Do not rub the eye or place a bandage over the eye. While waiting for medical care, have the person wear sunglasses to decrease light sensitivity. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physician. Self Protection of the First Aider: Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning of mouth and throat, abdominal cramps, nausea, vomiting, diarrhea, shock. May lead to convulsions, coma, and even death. Inhala tion: Irritant of the nose and throat, causing coughing, difficulty breathing, and pulmonary edema. Eyes and skin Corrosive injury. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water fog, alcohol foam. Unsuitable Extinguishing Media: Do not use dry chemical fire extinguishing agents containing ammonium compounds (such as some A:B:C agents), since explosive compound can be formed. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Closed containers exposed to heat may explode. Spilled material may cause floor slippery. Reacts with ethyleneimine, primary amines, urea, ammonium salts, Hazardous Decomposition Products: Thermal decomposition products are toxic and may include oxide of chlorine and sodium. ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment. Soak up spills with absorbents, then dispose of in an appropriate waste container. Keep material away f rom sewers. Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Small spills of sodium hypochlorite solutions can be broken down by covering it with a sodium thiosulfate, sodium metabisul fite or ferrous salt. Diluted sulphuric acid could be added to speed up the reaction. Transfer the mixture into a large container of water and n eutralize mixture with soda ash. Back to Top SECTION 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing sprays or mists. Ventilate area if possible. Store in a cool, dry place away from incompatibles. Keep co ntainer closed when not in use. Do not mix with any other chemicals. Store at temperatures below 30 C and keep from freezing. Do not mix with acid/ammonia. Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LI MITS: Sodium Hypochlorite CAS No.: 7681 Regulation: AIHA Type of Listing: STEL Value: 2mg/m (15 minutes) Chlorine CAS No.: 7782 Regulation: ACGIH Type of Listing: TLV TWA Value: 0.5 ppm INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety g lasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Ba ck to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, light yellow/green colour Odour: Pungent, chlorine odo Odour Threshold N/A pH: 10.8 11.2 Melting Point /Freezing Point C (5% solution) Initial Boiling Point and Boiling Range Slowly decomposes above 40 Flash Point: �100 Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower Flammability or Explosive Limits None Vapor Pressure Does not form a vapour Vapor Density N/A Relative Density /Specific Gravity (Water = 1): @ 20 Solubility(ies): Soluble in water Partition Coefficient octanol/water: Log P 3.42 (estimated) Auto ignition Temperature Not flammable Decomposition Temperature Slowly de composes above 40 Viscosity N/A VOCs% N/A Back to Top ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical Stability Unstable under normal storage conditions. Sodium hypochlorite solution decompose slowly. Decomposition accelerated by heat (above 40 C) and light. Possibility of Hazardous Reactions Avoid contact with acid or ammonia Conditions to Avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Avoid contact with strong reducing agents, organic compounds, ewis or mineral acid, methanol acid, ammonia, urea. Avoid sunlight. Incompatibility: Incompatible with acid, nickel, tin, copper, manganese, iron, ammonia, urea and other organic compounds. Hazardous Decomposition Products: Chlorine gas, oxi de of sodium , h ydrochloric acid Back to Top SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Ingestion, skin and eye contact. Symptoms: Corrosive to eyes and skin. May cause productive cough, running nose, redness, pain and drying and cracking of skin. Acute exposure may cause irritation of nose, throat and respiratory trace. Acute Toxicity Estimates: Oral ATE 2000 mg/kg Dermal ATE � 2000 mg/kg Inhalation ATE : N/A Skin Sensitization: Data available on components indicates no potential skin sensitization. Germinal Cell Mutagenicity: Data available on components indicates no potential germinal cell mutagenicity. Reproductive Toxicity: Data available on components indicates no potential reproductive toxicity. Carcinogenicity: pochlorite salts are listed as Group 3 Carcinogen by I ARC. Aspiration Hazard: Data available on components indicates no potential aspiration hazard. Isolated cases of allergic skin reactions have been reported following handling of sodium hypochlorite solutions. However, the cases are insufficiently documented and affected persons having multiple sensitization . In any case, the number of cases is so small in the context of the extensive use of sodium hypochlorite solutions in industry and in the home that an allergenic effect is assumed not to occur. Back to Top ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 12: ECOLOGICAL INFORMATION Toxicity to Fresh Water Algae Sodium Hypochlorite (CAS# 7681 Red alga mg/L, Exposure Time, h, Test Type: N/A Toxicity to Fish Species: Sodium Hypochlorite (CAS# 7681 9): Salmo gairdneri 0.07 mg/L, Exposure Time, h, Test Type: N/A Toxicity to Aquatic Invertebrates: Sodium Hypochlorite (CAS# 7681 9): Daphnia magna 0.0 mg/L, Exposure Time, 48 h, Test Type: N/A Persistence and degradability: N/A Back to Top SECTION 1 DISPOSAL CONSIDERATIONS Recommended Waste Disposal Methods: Reuse if possible. Otherwise dispose recovered material in accordance with all local, Provincial or Federal regulations. Back to Top SECTION 14: TRANSPORT INFORMATION Canadian TDG UN Number: 1719 UN Proper Shipping Name: HYPOCHLORITE SOLUTION (more than 7 percent available chlorine) Transport Hazard Class(es): Packing Group: Environmental Hazards: Not listed as a marine pollutant under Canadian TDG Regulations, schedule III. Special Precautions for User: Not avail able. Additional Information: Limited Quantity Index: 5 Litres Back to Top SECTION 15: EGULATORY INFORMATION HAZARD RATING INFORMATION Extreme High Moderate Slight Insignificant HMIS Health Flammability Reactivity Personal protection ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 15: EGULATORY INFORMATION C = Safety glasses + Gloves + Apron HMIS Protection Group + All pertinent hazard information has been provided in this SDS, per the requirements of the U.S. Federal Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and the Canadian Workplace Hazardous Materi als Identification System Standards (CPR 4). Back to Top SECTION 16: OTHER INFORMATION ACRONYM LIST ACGIH American Conference of Governmental Industrial Hygienists ATE Acute Toxicity Estimate CAS Chemical Abstracts Service CFR Code of Federal Regulations DSL/NDSL Domestic Substances List/ Non domestic Substance List Half maximal effective concentration HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer MSHA Mine Safety and Health Administration N/A Not Available NIOSH The National Institute for Occupational Safety and Health N.O.S. Not Otherwise Specified NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit PNOC Particulates not otherwise classified ��PROJECT CLEAN DISHMACHINE CHLORINE SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 16: OTHER INFORMATION Partition Coefficient Octanol: Water SDS Safety Data Sheets STOT SE Specific Target Organ Toxicity Single Exposure STOT Specific Target Organ Toxicity Repeated Exposure TDG Transportation of Dangerous Goods TLV Threshold Limit Value United Nations VOCs Volatile Organic Compounds WEL Workplace Exposure Limit WHMIS Workplace Hazardous Materials Information System Back to Top It is the responsibility of the user to provide a safe workplace, using the health and safety information contained herein as a guide. Project Clean Inc. (formerly Maxim Chemical International Inc.) ill accept no liability for damages or loss incurred from the improper handling and use of this product. The information provided in the Safety Data Sheet has been obtained from current sources and is believed to be reliable.
Maxim Dazzle Plus AODA.pdf ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 1: IDENTIFICATION Product Trade Name: Maxim Dazzle Plus Product Code: 1100202 Recommended Use: Chlorinated Powder Dish Detergent Restrictions on Use: For Industrial and Institutional use only Manufacturer Name: Project Clean Inc. Manufacturer Address: 1607 Derwent Way, Delta, B.C. Canada V3M 6K8 Manufacturer Phone Number: 800 663 9925 Email Address of Competent Person Responsible for the SDS: regulatory@projectclean.com Emergency Phone Number/ Hour Number: For Transportation Emergencies: Canutec 613 996 6666 Emergency Response Services : Chemtrec 800 424 9300 Back to Top SECTION 2: HAZARD IDENTIFICATION Physical Hazards CORROSIVE TO METALS Category 1 Health Hazards: SKIN CORROSION/ IRRITATION Category EYE DAMAGE/ IRRITATION Category 1 SPECIFIC TARGET ORGAN TOXICITY SINGLE EXPOSURE Category 3 Symbol: Signal word: DANGER Hazard Statement: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H335 May cause respiratory irritation. PRECAUTIONARY STATEMENTS Prevention: P234 Keep only in original packaging. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash hands or affected area thoroughly after handling. P271 Use only outdoors or in a well ventilated area. ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 2: HAZARD IDENTIFICATION P280 Wear protective gloves/protective clothing/eye protection/face protection. Responses: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P363 Wash contaminated clothing before reuse. P321 Specific treatment (see supplemental first aid information on this label). P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P390 Absorb spillage to prevent material damage. Storage: P403 + P233 Store in a well ventilated place. Keep container tightly closed. P405 Store locked up. P406 Store in a corrosion resistant container with a resistant inner liner. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Back to Top SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Approx. Wt.% CAS Number Sodium Carbonate 497 Sodium Metasilicate 6834 Sodium Tripolyphosphate 7758 Sodium Dichloroisocyanurate Dihydrate 51580 Back to Top SECTION 4: FIRST AID MEASURES General Information: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Inhalation Immediately remove the affected victim to fresh air. If symp toms persist, obtain medical attention. ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 4: FIRST AID MEASURES Skin Contact Immediately flush exposed area with plenty of water for at least 10 minutes. If irritation persists, or if contact has been prolonged, obtain medical attention. Remove contaminated clothing and launder before reuse. Eye Contact Immediately flush with running water for at least 15 minutes, holding eyelids open during flushing. Remove contact lenses, if present and easy to do. If irritation persists, repeat flushing and obtain medical attention i mmediately. Ingestion Do not induce vomiting. If the victim is fully conscious, give plenty of clean water to drink to dilute product. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness, or is convulsing. Call a Physic ian. Self Protection of the First Aider: Remove all sources of ignition. Ensure that first aid personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Most Important Symptoms/ Effects, Acute and Delayed: Ingestion: Burning of mouth and throat, abdominal cramps, nausea, vomiting, diarrhea, shock. May lead to convulsions, coma, and even death. Inhalation: Irritant of the nose and throat, causing coughing, difficulty breathing, and pulmonary edema. Eyes and skin Corrosive injury. If irritation occurs or persists, get medical attention. Back to Top SECTION 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media: Use water spray, dry powder, foam, carbon dioxide. Unsuitable Extinguishing Media: Do not use halogenated extinguishing agents or foam. Flammability: Not flammable. Flash Point: Not flammable. Special Firefighting Procedures: Wear full protective equipment including a NIOSH/MSHA approved, self contained breathing apparatus for firefighting situation. Use water spray to cool all nearby fire exposed surfaces. Unusual Fire / Explosion Hazards: Prolonged contact with metals may produce flammable/explosive hydrogen gas. Hazardous Decomposition Products: Carbon oxides, phosphorous oxides, sodium oxides, halogenated compounds, nitrogen oxides, hydrogen chloride, toxic fumes. Back to Top ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 6: ACCIDENTAL RELEASE MEASURES Environmental Protection Precautions: Do not release to the environment or water source. Steps e Taken Case Material Released r Spilled: Wear protective equipment including respiratory protection. Avoid dust formation. Sweep up and shovel material into an appropriate dry waste closed container. Keep material away from sewers. Reuse if possible, otherwise dispose recovered material in accordance with all local, provincial or federal regulations. Back to Top SECTI ON 7: HANDLING AND STORAGE Precautions Taken n Handling Storage: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Avoid breathing dust. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Keep out of reach of children Store at temperatures below Back to Top SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE LIMITS: OSHA (PEL): N/A ACGIH TLV: N/A Other exposure limit: N/A INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT Appropriate Engineering Controls: Good general or mechanical ventilation (dilution or local exhaust). Skin Protection: Hand Protection: Butyl rubber, neoprene, latex or nitrile gloves. Other Skin Protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved. Appropriate footwear should be selected based on the task being performed and the risks involved. Eye and Face Protection: Use chemical goggles or safety glasses. Respirator y Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Other Protective Equipment: Eye wash, safety shower and full protective clothing recommended in the immediate work area. Back to Top SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Appearance: White powder Odour: Faint chlorine odo ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odour threshold: N/A pH: 12.1 (3.1% solution) Melting point/Freezing point: N/A Initial boiling point and boiling range: N/A Flash Point: Not flammable Evaporation Rate (Water=1): N/A Flammability: Not flammable Upper/Lower flammability or explosive limits: None Vapo r pressure: N/A Vapo r density: N/A Relative density/Specific gravity (Water = 1): N/A Solubility(ies): �10 g/100 ml Partition coefficient: n octanol/water: N/A Auto ignition temperature: Not flammable Decomposition temperature: N/A Viscosity N/A VOCs% N/A Back to Top SECTION 10: STABILITY AND REACTIVITY Reactivity: N/A Chemical stability: Stable under normal storage conditions Possibility of hazardous reactions Contact with acids will cause evolution of heat. Flammable hydrogen gas can be generated on prolonged contact of water solutions with sensitive metals (aluminum, brass, copper, lead, tin, zinc). Conditions to avoid Temperatures above 30 C (86 F) and below 5 C (41 F). Incompatibility: Strong acids, reducing agents, sensitive metals , oxidizing agents, organic solvents and compounds. Hazardous Decomposition Products: Carbon oxides, phosphorous oxides, sodium oxides, halogenated compounds, nitrogen oxides, hydrogen chloride, toxic fumes. Back to Top ��MAXIM DAZZLE PLUS SAFETY DATA SHEET ��PREPARED BY: LAST UPDATE: Regulatory Division Page of Project Clean Inc. (formerly Maxim Chemical International Inc.) SECTION 11: TOXICOLOGICAL INFORMATION Likely routes of exposure: Skin and eye contact, inhalation. Symptoms: Corrosive to eyes and skin. May cause irritation of the respiratory tract. Acute Toxicity Estimates: Oral ATE 2000 mg